Bedienungsanleitung V-Tac VT-5415 (Seite 1 von 1) (Englisch)

761979

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

WIFI DOORBELL (CHIME)

TECHNICAL DATA

INTRODUCTION

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read

these instructions carefully before starting the installing and keep this manual handy for future

reference. If you have any another query, please contact our dealer or local vendor from whom

you have purchased the product. They are trained and ready to serve you at the best.

WARNING!

1. Please make sure to turn oﬀ the power before starting the installation.

1. Check that your mains supply is correct for the doorbell receiver.

2. The receiver is for indoor use only. Do not use outside or allow to become wet.

3. There are no user-serviceable parts. Do not attempt to repair either the transmitter or the

receiver by yourself.

THE FIRST USE GUIDE:

1. Plug the receiver into a mains socket and switch the socket on.

2. Press the transmitter push button and conﬁrm that the transmitter indicator ﬂashes, the doorbell

receiver sounds “Ding-Ding” and the receiver indicator ﬂashes. The doorbell is paired. The default

ringtone is “Ding-Dong”. Users can change the ringtone easily, just refer to the “CHANGING THE

RINGTONE” steps.

CHANGING THE RINGTONE / PAIRING:

Step 1: Press the Backward or Forward button on the receiver to choose your favorite melody.

Step 2: Press and hold down the Volume button on the receiver for 5 seconds, until it makes a

“Ding” sound and the receiver indicator ﬂashes (that means the doorbell entered into the Pairing

Mode, the pairing mode will only last 8 seconds, then it will automatically exit).

Step 3: Press the button on the transmitter quickly, it will makes a “Ding-Ding” sound and the

receiver indicator ﬂashes.

Step 4: Press the button on the transmitter again to conﬁrm whether the current ringtone is the one

you have set, if yes, the pairing is completed.

Remark: This method is also suitable for adding/pairing additional transmitters.

CLEARING THE SETTINGS:

Press and hold down the Forward button on the receiver for 5 seconds,

until it makes a “Ding” sound and the receiver indicator ﬂashes, all the

settings will

be cleared, the doorbell will back to the factory default settings (it means

that the ringtone you have set and the transmitters you have add-

ed/paired will be cleared).

INSTALLATION:

1. Plug the receiver into a mains socket and switch the socket on.

2. Place the transmitter exactly where you intend to ﬁx and, with the doors closed, conﬁrm that the

doorbell receiver still sounds when you press the transmitter push button ( If the doorbell receiver does

not sound, this may be due to metal within the ﬁxing surface and you may need to reposition the

transmitter ).

3. Fix the transmitter in place with bracket.

ADJUSTMENTS:

1. The volume of the doorbell may be adjusted to one of ﬁve levels. Press the Volume button on the

receiver to increase the volume by one level, the receiver will sound to indicate the selected level. If the

maximum level is already set, the doorbell will switch to the minimum level, which is the Silent Mode.

2. The melody played by the doorbell may be set to any one of 55 diﬀerent selections. Press the Back-

ward or Forward button to select the next available melody, the receiver will sound to indicate the

selected melody. To set the doorbell ringtone to the selected melody, please refer to the “CHANGING

THE RINGTONE” steps.

CHANGING THE BATTERY:

1. Insert the Mini Screwdriver in the cover slot at the bottom of the transmitter and twist to release the

transmitter from the cover.

2. Remove the exhausted battery and dispose of properly.

3.Insert the new battery into the battery compartment. Observe

correct battery polarity (+ve and -ve), or the unit will not function and may be damaged.

4. Reﬁt the transmitter to the cover, with the push button at the bottom.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu

For More products range, inquiry please contact our distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

This marking indicates that this product should

not be disposed of with other household wastes.

RECEIVER

PRODUCT DIAGRAM

TRANSMITTER

Speaker

AC Plug

Volume

Backward

Forward

Indicator Light

Light Sensor PIR

HD 720P

Camera Lens AC Input Hole

Stuck Hole

Security Screw

Backet Screws

Hole

BRACKET

STEP 1 STEP 2 STEP 3 - 4

IP55

RATING

INPUT POWER BATTERY OPERATION

TEMPERATURE

RATING

NO OF

RINGTONES

OBJECT

DISTANCE

DECIBEL

LEVELS

AC:110-260V 3.7V, 3400 mAH -30°C to 70°C /

-22°F to 158°F IP55 55 1000 FT. /

300M

0-110 DB, 5

LEVELS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

V-Tac VT-5415 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info