Bedienungsanleitung Vaillant ecoTEC exclusiv 365 (Seite 6 von 16) (Englisch)

469483

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

6 Instructions for use ecoTEC / 838402_06

4 Operation

4.1 Overview of controls on ecoTEC plus and

ecoTEC exclusive

Fig. 4.1 ecoTEC plus and ecoTEC exclusive controls

For access to the controls open the front flap by pulling

at the centre of the case strip.

1 Display indicating the current heating flow temperature, the

pressure in the heating system, the operating mode or addi-

tional information

2 The “i” information button

3 Built in control/timer (if fitted)

4 Pressure gauge displaying the pressure in the heating system

5 Main ON/OFF control

6 “+” button for moving forward in the display

7 “-” button for moving back in the display or for displaying the

pressure in the heating system

8 “Reset” button

9 Maximum radiator temperature control

10 Maximum hot water temperature control and warmstart ON/

OFF control (ecoTEC plus combination boilers only)

Advanced multifunctional display system

Fig. 4.2 Display on ecoTEC plus and ecoTEC exclusive

The ecoTEC plus and ecoTEC exclusive appliance is fit-

ted with a digital information and analysis system. This

system provides information on the operating status of

your appliance. During normal operation, the display (1)

shows the current heating flow temperature (in this ex-

ample 45 °C). In the event of a fault, an error code ap-

pears instead of the temperature. The ecoTEC exclusive

display has also cleartext for a direct information

The display also gives the following information:

1 Indication of the current heating system flow

temperature or water pressure in the heating

system or display of a status or error code

Actual setting of the modulation

(only ecoTEC exclusive)

Abcd...

Clear text display (only ecoTEC exclusive)

Fan speed malfunction

As long as this symbol appears in the display,

a heating flow temperature and hot water out-

let temperature is set by the vrnetDIALOG ac-

cessory, which means the appliance uses tem-

peratures other than those set using the con-

trols (9) and (10).

This condition can only be ended:

- using vrnetDIALOG or

- by a change in temperature at controllers

(9) or (10) of more than 5 K.

This condition cannot be ended:

- with the "Reset" button (8) or

- by turning the appliance off or on.

Heating mode active

Illuminated: Heating mode

Flashing: Anti cycling mode active

Hot water supply active

(ecoTEC plus combination boilers only)

Illuminated: Hot water demand

(ecoTEC system boilers only)

Illuminated: Heating of an indirect hot

water cylinder turned on

Flashing: Heating demand from the hot

water cylinder, burner on

Warmstart system active

(ecoTEC plus combination boilers only)

Illuminated: Warmstart turned on

Flashing: Warmstart demand, burner on

Internal pump is running

Gas valve is activated

4 Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vaillant ecoTEC exclusiv 365 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vaillant ecoTEC exclusiv 365

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info