Bedienungsanleitung Valera ManiSwiss 651.01 (Seite 4 von 57) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

460104

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Model 651.02: Move the switch (4, fig.1) to switch the

appliance on and off. You can choose between two

rotation speeds: 4500 and 6000 rpm.

CHARGING THE BATTERY

(model 651.02 only)

•Charge the battery for 12 hours before using the

appliance for the first time and whenever the battery

runs flat from use.

•Switch the appliance off at the switch (4, fig.1). The

battery only recharges when the appliance of switched

off.

•Connect the transformer (21, fig.1) to the appliance by

inserting its plug into the socket on the appliance (5,

fig.1).

•Plug the transformer into the mains socket.

•Recharge the battery whenever you notice a drop in

power from the appliance.

•When the battery is fully charged, the appliance can

be used for 60 minutes disconnected from the mains

electricity supply

•The appliance can function both on mains power and

in cordless mode using the rechargeable battery.

•If the appliance fails to function on mains power when

the battery is completely discharged, switch it off,

charge the battery for about five minutes, then switch

it back on again using mains power.

FITTING AND REMOVING

ACCESSORIES

•Only fit or remove accessories with the appliance

switched off.

•Pull the accessory to remove it from the appliance.

To fit an accessory, push it all the way into its seat

(fig.3).

•Model 651.01: Push the sanding rings over their

holder. If necessary, use a suitable tool to remove

them (fig.4).

USEFUL HINTS

- Always use clean and properly disinfected

accessories.

- Make sure that your skin is clean and dry. Avoid

washing hands or feet immediately before beginning

the treatment.

SHORTENING NAILS

Use the fine sapphire cone (7, fig.1). Regular care

helps keep your nails strong.

By abandoning scissors and nail cutters you will be able

to shorten your nails to a more precise length and avoid

ingrown nails.

INGROWING NAILS

Use the needle tip grinder (14, fig.1) or flame tip

grinder (16, fig.1) to treat and prevent ingrown nails.

Proceed in small steps, and with great care. Maintain a

steady hand.

CORNS AND CALLUSES

Use the fine sapphire cone (7, fig.1) to remove hard

skin from corns and calluses.

Finish the treatment with the ball tip sapphire grinder

(15, fig.1).

HARD SKIN AND CALLOSITIES

Pass the coarse sapphire cone (8, fig.1) over the area

to be treated. Repeat until the hard skin or callosity has

been eliminated. On larger areas use the long sapphire

cone (9, fig.1).

SKIN AROUND THE NAILS

To remove dead skin from around the nails, especially

the nails of the feet, use the flame tip grinder

(16, fig.1).

SURFACE OF NAILS

Use the cylindrical grinder (17, fig.1) to grind down

thick nails on the feet. To smooth the surface of nails

and eliminate ridges, use the felt cone (12, fig.1).

CUTICLE SKIN

Treat cuticle skin only when damp.

To push back cuticle skin, use the cuticle tool

(20, fig.1) (model 651.01 only). The tip does not rotate

but performs a forward-backward motion.

POLISHING NAILS

To polish both natural and artificial nails, use the brush

(13, fig.1) (model 651.01 only).

TREATING ARTIFICIAL NAILS

To shorten and shape artificial nails, use the sanding

rings on the relevant holder (18, fig.1) (model 651.01

only).

USING ACCESSORIES FROM

OTHER APPLIANCES

To use accessories from other appliances, use the

spindle (19, fig.1) (model 651.01 only).

PROTECTION AGAINST NAIL DUST

To protect yourself against nail dust during treatments,

use the clear guard (6, fig.1) (model 651.01 only).

CLEANING AND MAINTENANCE

Clean the appliance after every use.

•Switch the appliance off and disconnect it from the

mains supply before performing any maintenance or

changing any parts

•After every use, remove the accessory and clear

guard (if used) (6, fig.1).

•Clean used accessories in denatured alcohol using a

brush or sterilise them in boiling water or in a suitable

steriliser.

ged

if you

ection

excess

ce.

eed

holder

only)

nce by

cket.

fig.1)

the

500 and

duce

pliance

00060557 norme uso INT:Layout 1 17/06/2008 8.28 Pagina 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Valera ManiSwiss 651.01 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info