POWDP50300 EN
Copyright © 2021 VARO P a g e | 9 www.varo.com
WARNING: Before making any adjustments ensure the machine is switched
off or remove the battery pack.
10.4 Using the dust bag (Fig. 7)
Insert the dust bag (4) into dust extraction port, make sure the dust bag is tightly fastened.
10.5 Operation for working
▪ Fit the dust bag (4) to the finishing sander.
▪ Hold the sander in front and away from you, keeping it clear of the work piece.
▪ Turn on the sander using the ON/OFF switch button (2).
▪ Let the motor build up to speed then gradually lower it on to the work with a slight
forward movement.
▪ Move the sander slowly over the work piece using forward and back or side to side
strokes.
▪ Upon completion of the sanding operation remove the sander from the work piece
before turning if off.
11 TECHNICAL DATA
13 CLEANING AND MAINTENANCE
▪ The machine does not require any special maintenance.
▪ For safe and efficient working, always keep the machine and the ventilation slots clean.
▪ Always be sure that the tool is switched off and unplugged before carrying out any work
on the tool.
14 STORAGE
▪ Thoroughly clean the whole machine and its accessories.
▪ Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
