BEFORE USE
1 Always ensure that the cable is fully unwound from
the motor unit
2 Do a dust bag check
The suction power of your VAX will decrease
considerably when the dust bag is full
REGULARLY (when you buy a new pack of 3 dust bags)
1 Replace the cone filter
Turn the retaining ring anti-clockwise and remove it.
Lift out the filter and put in a new one.
Replace the retaining ring.
2 Clean the black exhaust filter
Push upwards on the plastic grille, it will release. Pull it out.
Take out the filter and wash it in warm water.
Squeeze it dry and replace it.
Your VAX will work more efficiently if the black exhaust filter
is replaced with a new one occasionally.
Replacement filters are available from your VAXService Agent.
3 Clean the blue filter
The blue filter is on the bottom of the motor unit.
Pull it out and wash it in warm water.
Squeeze it dry and replace it.
Your VAX will work more efficiently if the blue exhaust filter
is replaced with a new one occasionally.
Replacement filters are available from your VAXService Agent.
ALWAYS AFTER USE
Re-wind the power cable around the motor unit
Always re-wind in a clockwise direction. This will avoid kinks and
strains on the inner wires which could cause damage to the cable.
Looking after your VAX
4
