Bedienungsanleitung VAX V-081 (Seite 6 von 12) (Englisch)

541456

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

vax.co.uk

operation

Connection to Mains Supply

Plug the steam cleaner mains plug into a properly

installed socket (Fig.4/3) and switch the steam cleaner on

by pressing the on/off switch (Fig.4/4).

The green operating pilot lamp and the orange heating

pilot lamp (Fig.4/4) light up. The operating pilot lamp

lights up as soon as the steam cleaner has been plugged

in and switched on. The heating pilot lamp indicates that

the steam cleaner is currently heating up. The operating

temperature is reached after approx. 11 minutes and the

orange heating pilot lamp goes out. The appliance is now

ready for use.

Using the Steam Cleaner

IMPORTANT: Never aim the steam outlet of the

steam gun at people, animals, plants or electrical

systems (e.g. oven or socket). There is a risk of

scalding or electric shock.

IMPORTANT: Before use please check all

connections are fitted securely together.

NOTE: Residual steam continues to escape for a few

seconds after switching off the steam function.

Release the locking device (child-proof device) by pushing

the triangular pin on the right-hand side of the steam

gun in towards the left (Fig.4/5).

Hot steam now escapes if the steam button is operated.

First of all hold the steam gun over an old cloth to absorb

any initial spray water. Operate the steam button until

the steam is emitted evenly. Cleaning can now begin.

NOTE: Always test the steam cleaner first on

inconspicuous or invisible areas of the surfaces or fabrics

to be cleaned to check their tolerance to hot steam.

• Steam may result in bleaching of painted/ varnished

wood.

• Steam may discolour shiny plastics.

• Acrylic, velvet and linen react very sensitively to the hot

steam.

• Do not use the steam cleaner on Dralon fibres without

first having carried out a suitability test on a concealed

area.

For understandable reasons, the manufacturer cannot be

held responsible for damage to objects, materials, people,

animals or plants that occurs due to unsuitable use of hot

steam or due to improper use of the appliance.

NOTE: The steam cleaner is fitted with an overheating

cut-out. The steam cleaner switches off automatically on

reaching a temperature of 180°C to prevent overheating.

Disconnect from the mains immediately by removing the

plug. The steam cleaner may be operated again after a

30-minute cooling period.

Do not aim the steam outlet at one point for too long.

Loosen the dirt by moving the steam jet backwards and

forwards. The flow rate of the steam emitted can be

regulated by turning the steam controller and can be

adjusted to the level required. Turn the steam controller

clockwise for less steam and anti-clockwise for more

steam (Fig.4/6).

Fig.4/3

Fig.4/4

Fig.4/5

Operating

pilot lamp

Heating pilot lamp

V-081 Series User Guide.qxd:User Guide 22/4/10 17:26 Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VAX V-081 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info