NOTE: It is advisable to use distilled water to prevent
limescale deposits if your water is very hard (over
2.5mmol/l or 21˚dH). Otherwise boil the water first to
extend the life of the steam cleaner.
IMPORTANT: Do not exceed the maximum quantity
of 1.1 litres when filling the tank.
3. Screw the filler cap firmly back on by turning it
clockwise while pressing down.
Connection to Mains Supply
1. Plug the steam cleaner mains plug into an
electrical outlet and switch the steam cleaner on
by pressing the on/off switch. The light on the
switch will come on (Fig.3/3).
4
How to Operate
Fig.3/2
Filling the Tank
IMPORTANT: Never unscrew the tank cap during use.
The tank is under pressure.
IMPORTANT: Do not operate a damaged appliance or
damaged accessories.
IMPORTANT: This steam cleaner is not intended for
commercial use.
NOTE: Carpets should be dry vacuumed thoroughly
before using the steam cleaner.
NOTE: If the supply cord is damaged, it must be
replaced by the manufacturer, a Vax service agent or
similarly qualified persons in order to avoid hazard.
3. How to Operate
1. The steam cleaner has a built-in water tank
holding 1.1 litres. Switch the steam cleaner off and
remove the mains plug from the socket. The
steam cleaner must always be disconnected from
the mains when filling or topping up with water.
Unscrew the filler cap by pressing the cap down
and simultaneously turning it anti-clockwise
(Fig.3/1).
2. Use the funnel supplied when filling with water
(Fig.3/2).
IMPORTANT: Only fill with pure water without
additives of any kind, e.g. perfume, cleaning agents,
alcohol, as they could damage the steam cleaner
and make it dangerous to use.
Fig.3/1
Fig.3/3
