Bedienungsanleitung VAX VPW2 PowerWash (Seite 4 von 9) (Englisch)

541535

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Attach both wheels

and push until they

click into place.

Attach the hose connector

to water inlet by turning

clockwise until tight.

Slot the handle in to the

top of the machine and

insert the 2 screws, turn

clockwise to tighten.

Align the pressure hose and

cord storage hook onto the

back of the machine and

secure with 2 screws.

Assembling your pressure washer

Preparing your pressure washer for use

Always make sure the pressure washer and water supply is o before connecting or disconnecting the hose

and accessories.

Pushthepressurehosermly

to the water outlet and turn the

pressure hose collar clockwise

until tight.

Whilstrmlypushingthelance

into the trigger handle turn

clockwise to lock into position.

LOCKED

UNLOCKED

A trigger safety lock is located

underneath the handle. The safety

lock should always be in LOCKED

position before connecting/

disconnecting the pressure hose to

the trigger handle.

To remove the lance from the trigger handle

rmlypushandtwistthelanceanti-clockwise.

When unlocked pull to remove.

Getting started Using your machine

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

Make sure water supply

is not connected. Firmly

push the water hose pipe

with suitable connector

onto the water inlet to

lock into position.

Connect water hose pipe to

a suitable water supply and

turn water on.

Before plugging the machine

in, press the unlock safety

button on the trigger handle

and squeeze the trigger until

water starts to ow through

the nozzle.

IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.

WARNING: Don’t leave the pressure washer running when not in use, or more than 5 minutes to prevent overheating.

Before switching the machine on, the trigger handle must be squeezed to release water and to remove any airlocks in the

machine or pressure hose. Always release any build up pressure in the handle prior to disconnecting the hose.

Connect the power cord

to the mains supply via

an RCD adaptor.

IMPORTANT: Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting

/disconnecting the pressure hose.

Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.

To connect pressure hose to trigger

handle, press the pressure hose

release button and push pressure

hose to lock into position. Gently

pull the pressure hose to check the

connection.

Push the ‘I’ switch to turn on.

The machine will run for a

few seconds then stop but no

water will be released.

Squeeze the trigger on the trigger

handle to release a high pressured

water jet, and start cleaning.

Don’t aim the pressure washer

directly at people, animals, plants,

electrical components, wires or the

pressure washer itself.

WARNING

Push ‘O’ switch to turn o.

After connecting

pressure hose, lance

and accessories check

theyaresecurelytted

and lock in place before

turning on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VAX VPW2 PowerWash Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info