Bedienungsanleitung Vd-tech TQT1910VD (Seite 32 von 36) (Englisch)

477885

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

If you're having problems

If you are having problems with your TV, carry out the following checks first.

If you are still having problems, unplug your TV and contact the service centre.

There is no sound and no picture coming from my TV.

-Check that you have connected the TV power cord properly and switched the wall socket on.

-Check that the power switch at the rear of the TV is set to " ON" .

-Check that you have turned on the POWER button on your TV.

-Check the picture contrast and brightness setting.

There is a normal picture but no sound coming from my TV.

-Check that your TV is not muted or has the volume down.

-Switch the channel, the problem may be with the channel you're on, not the TV.

-Check that your audio cable input has been plugged in properly. If you are using an

external a mplifier .

The remote control does not work.

-Check to see if there is any object between your TV (such as a piece of furniture) that

could block the remote control from connecting with the sensor on your TV.

-Have you put the batteries into the remote control the right way? ( So + to + and - to -)

-Correct remote operating mode was set (such as TV or VCR).

-The TV is not positioned in bright sunlight.

-Try fitting new batteries if none of the above work.

The TV has turned off suddenly.

-Check that you have not set the sleep timer.

-Check that you have not set the timer to control the socket which has your TV power

cord on.

-Check that you have not set auto standby with the broadcast signal source which is

connected to your TV.

The picture on my TV appears slowly after I have switched it on.

This is normal. The image takes a few seconds to appear after you have switched the

TV on. Please contact your service centre if picture has not appeared after five minutes.

There is no or poor quality colour or a poor picture on my TV.

-Change the colour setting on the PICTURE MENU.

-Keep a distance between your TV and any VCR you may be using

-Try watching another channel. The problem may be with the channel you're watching.

-Are the video cables installed properly?

-Change the setting of picture brightness on PICTURE MENU.

There are horizontal and vertical bars on the screen, the picture is shaking.

-Check if any signal interference activities is going on nearby, such as an electrical

appliance or power tool is in operation.

The reception is poor on some channels.

-The TV channel you're watching may be having problems. Change to another channel

and see if the same is happening.

-TV broadcasting signal is weak or has been interrupted.

-Check whether signal sources have any possible interference.

There are lines or streaks on the pictures.

-Check if there is any damage to the aerial on the roof, try to change the direction of the

aerial to receive a better signal.

One of the TV's speakers does not work.

-Check the sound balance setting on SOUND MENU.

Problems and how to fix them

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vd-tech TQT1910VD Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vd-tech TQT1910VD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info