Bedienungsanleitung VDO Dayton CD1107 (Seite 16 von 18) (Englisch)

98458

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Loading CD in the CD player

1. Press the button to switch the set on.

2. Press REL button to open the front.

3. Insert the CD (label facing up) into the CD

slot.

When a disk is loaded it will be played auto-

matically.

Note: If a CD does not automatically load, DO

NOT FORCE it into the slot, this could damage

the CD and the set.

4. Close the front.

Displaying playback time

In CD/MP3 mode the playback time can be dis-

played.

1. Press the DISP button and toggle until the

playback time of the loaded CD is displayed.

Pausing a CD

Radio:

1. Short press the to pause or resume

playing.

Remote Control:

1. Long press the on the remote control to

pause or resume playing.

Ejecting a CD

1. Press REL to open the front.

2. Press the EJECT button to eject the CD.

3. Remove the disc.

4. Close the front.

CD playback

This CD player is suitable only for 12 cm disc

and can read both audio and MP3 format CD.

Please do not use irregular shaped CD.

Compressed Audio playback

You are able to listen to MP3 files that conform

to MPEG1/2 & 2.5-Layer 3 at bit rate up to 320

kbps or Variable Bit Rate (VBR) burned with ID3

tag. The files can be burned on a CD-R or CD-

RW disc in ISO9660 level 1 and 2 format are

also supported.

Playing a CD-R or CD-RW

Depending on the type of CD-R/CD-RW CD,

surface condition of the disc, as well as the per-

formance and condition of the CD writer, certain

CD-R/CD-RW CD may not operate normally on

this unit.

Playing a “copy protected” non-

conforming audio CD

Due to use of copy protection schemes of some

audio CDs, which are non-conformance to inter-

national audio CDs standards (Red Book), these

type of copy protected disc(s) may not play on

this set.

Listening to CD/MP3

If the first track is a data track, the disc will be

treated as MP3 disc. (If no MP3 file was found

throughout the disc, then it will treat as audio

disc). If first track is an audio track, the disc will

be treated as audio disc.

If TA are set to ON, announcements will interrupt

CD playback.

Displaying CD/MP3 playback time

Note: The set must be in CD/MP3 mode.

1. Press the DISP button to look up the play-

back time.

Track/File Selection

Track Advance

1. Short press the or button to skip to

the next track or file, forward or backward.

Fast Forward

1. Long press the or button to skip to

fast forward or backward the track or file,

once it reaches the next track or file the fast

forward function is terminated.

Repeating a Track or File

To continually repeat the current track.

1. Long press the RPT (REPEAT) button to

repeat the track/file currently playing.

Random Feature

1. Long press the RDM (RANDOM) button to

play the tracks or files in random order.

Intro Feature

1. Long press the INT button to scan the track

or files. Each track or file will be played for

10 seconds.

2. To stop scanning, press the button again

and the current track or file will be played.

Skipping Track or Files (CD1327 only)

1. Long press the –10 button to skip backward

10 tracks or files.

2. Long press the +10 button to skip forward 10

tracks or files.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

VDO Dayton CD1107 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von VDO Dayton CD1107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info