Bedienungsanleitung Velbon ULTRA 655 (Seite 2 von 2) (Englisch)

661687

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ULTRA 655(A)/ULTRA 555(A)

Hold Rubber foot tightly and rotate it towards unlock

direction and feel 4 clicks. This means that each leg

section becomes loosen.

Extend legs till the end and twist them towards lock

direction firmly. When closing legs, do this procedure in

reverse order.

In order to adjust length of leg, hold Adjustment grip of

second leg and unlock by rotating it anti-clockwise. Then

extend leg and find desired length.

Then lock it by rotating leg by clockwise firmly.

While closing leg slowly whose position is

low-position(shown as above picture), Leg angle selector

slides towards left automatically making a click sound.

This position is semi low-position.

Lower part of Elevator which is divided is called Lower

column.

Remove Center end by turning anti-clockwise and screw it

into the part devided. This prevents dirt and so on.

Do not lose removed Lower column.

If closing leg further, Leg angle selector slides automati-

cally making a click sound. This makes standard position.

※

※ ※

※

Lock

Unlock

Extending along with

the groove till the end

Closing

Screw in

Center End

When changing panhead, tighten all the stoppers such as

Panning handle, Side tilting handle, Panning stopper and

Elevator stopper firmly.

Then turn the whole panhead anti-clockwise and detach it

from tripod. Other panheads such as ball socket head can

be set up.

Loosening Elevator stopper enables Elevator to go up and

down. When the desired position is found, tighten Elevator

stopper.

While operating Elevator, make sure to hold your

camera securely.

While closing legs, slide Leg angle selector towards right

completely until you hear click sound.

Then opening legs fully realizes low-position. While

Elevator stopper is tightened, turn lower part of Elevator

anti-clockwise.

Then Elevator is divided in two parts.

When Leg angle selector is slid by mistake, push

down cancel-buttun. Leg angle selector returns to

original position.

Click!

Tripod screw socket=UNIC1/4

Elevator stopper

(Tighten firmly)

Elevator stopper

Cancel-button

Leg angle selector

Split

Open the leg

Leg angle selector returns

towards left automatically

making sound of clicks.

Leg angle selector moves

towards left automatically

making a click sound.

When holding Rubber foot, do not soil

your hands. Do not pinch your fingers

and hands between Rubber foot and

legs.

When setting up your equipments on

tripod, make sure that strength of

leg-locking is good enough by

suppressing from top of the tripod.

Adjustment

Rubber foot

1.How to change panhead 2.How to use Elevator 3-1.How to adjust leg angle

3-2.How to adjust leg angle 3-3.How to adjust leg angle 4.Lower column

5.How to extend leg and lock How to adjust length of leg

Lower column

Remove

Back and forth

Operating Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Velbon ULTRA 655 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info