658528
4
Zoom out
Zoom in
Vorherige Seite
1/35
Nächste Seite
LCD screen
vE - 2015-10
4
LCD set functions:
Press the SET button for 5 seconds to activate the SET functions menu.
While the scooter is driving it is not possible to activate the SET functions.
The LCD SET functions shall be given in the sequence below:
1.
LCD backgr
ound light
The LCD b
ackground number is flashing, the brightness of the LCD
background light is adjustable in 5 grades.
Press the left blinker button to increase the brightness.
Press the right blinker button to decrease the brightness.
Press the SET button to confirm the modification.
2. Time
The 24 hou
r clock is flashing on the LCD screen. These means the time SET
24 hour clock is activated and can be changed. Press the left blinker button
to increase the hours or right blinker button to decrease the hours. Press the
SET button to confirm the modification.
Now the minutes are flashing. Press the left blinker button to increase the
minutes. Press the right blinker button to decrease the minutes. Press the
SET button to confirm the modification.
3.
°C / °F switch
The °C / °F is flashing. Now you can switch the unit from "°C to °F" or vice
versa with the left or right blinker button. Press the SET button to confirm the
modification.
4.
Mile / km swit
ch
The Mile /
km is flashing on the LCD screen. Now you can switch the unit
from "KM to MILE" or vice versa with the left or right blinker button. Press the
SET button to confirm the modification.
Press again on the SET button to exit the SET functions menu on go back to the drive state.
5. Driv
ing distance
First the driving distance of the TRIP is showed. These driving distance can
be reset to zero. With the SET button scroll to the Mile / km switch funtion.
Change this function 4x with the right blinker button. Press again on the
SET button to exit the SET functions menu on go back to the drive state.
Press the SET button, now the total driving distance (ODO) is showed.
These driving distance can be reset to zero by Vermeiren.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vermeiren Carpo 2 SE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Vermeiren Carpo 2 SE

Vermeiren Carpo 2 SE Bedienungsanleitung - Deutsch, Englisch - 196 seiten

Vermeiren Carpo 2 SE Zusatzinformation - Holländisch - 5 seiten

Vermeiren Carpo 2 SE Bedienungsanleitung - Holländisch - 32 seiten

Vermeiren Carpo 2 SE Bedienungsanleitung - Holländisch, Französisch, Italienisch, Spanisch, Polnisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info