574325
3
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
EVX-5300/-5400 OpErating Manual 1
EVX-5300 EVX-5400
IntroductIon
The
EVX-5300/-5400
series are a full-featured Digital/Analog transceiver de-
signed for exible mobile and base station business communications in the VHF/
UHF Land Mobile bands. These transceivers are designed for reliable business
communications in a wide variety of applications for a wide range of operating ca-
pabilities.
The
EVX-5300/-5400
series operate using the TDMA protocol for spectrum and
power efficiency resulting in lower total equipment cost compared to FDMA.
Digital eliminates noise and static from voice transmit to deliver only the in-
tended voice message crisply and clearly. The
EVX-5300/-5400
series feature the
AMBE+2™ vocoder for enhanced voice quality.
The
EVX-5300
allows up to 8 memory channels. The
EVX-5400
allows up to
512-channel capacity and 32 groups which can each be programmed with an
8-character Alpha-Numeric Tag. Important channel frequency data is stored in the
ash memory, and is easily programmable by a Vertex Standard licensed dealer
using a personal computer with Vertex Standard Programming equipment:
FIF-
12
USB Programming Interface,
CT-104A
(or
CT-171
) Connection Cable with
CE142
Software. Or, once a single radio is programmed, cloning cable
CT-4
can
be used to program additional radios directly.
The pages which follow will detail the many advanced features provided by the
EVX-5300/-5400
series transceiver. After reading this manual, you may wish to
consult with your Network Administrator regarding precise details of the congu-
ration of this equipment for use in your application.
For North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric Ad-
ministration have requested the cooperation of the U.S. Federal Communi-
cations Commission in preserving the integrity of the protected frequency
range 406.0 to 406.1 MHz, which is reserved for use by distress beacons.
Do not attempt to program this apparatus, under any circumstances, for op-
eration in the frequency range 406.0 - 406.1 MHz if the apparatus is to be
used in or near North America.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vertex Standard EVX-5300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info