623538
18
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
17
3.CHAPTER:
Touch screen
84" touch screen with the feature of multi-spot touch (6 spot at the same time) and infrared technology.
Using the Touch Screen with External Battery
Touch screen is integrated with Embedded Computer Module. IF you want to use the touch screen
when an external source is connected via HDMI or VGA, please connect the external source to
"INTERACTIVE BOARD" via a USB-USB cable. Connect that cable to the displayed UB input as
shown. Touch screen will be active in a short time. "To use the touch screen by an external source
may require a driver. In this case, the chosen required touch screen driver should be loaded to
external source device from the CD given with that device."
Touch screen controls the currently displayed image on the screen. If "Embedded Computer" is being
used as source, touch screen controls the "Embedded Computer". If an external source is connected
via HDMI or VGA and chosen as image, if touch screen is connected that source via USB, touch
screen is automatically transferred to control that source.
WARNING: To active the touch screen feature of the Interactive Board, the processing system should
be started.
WARNING: The touch screen feature of your Interactive Board is not supported for MacOs processing
system.
Touch Screen Installation
3.1.1. About installation
1.
Before starting installation, ensure that all drives as display chart and USB are installed correctly.
The usage of standard drivers given by manufacturers is recommended.
2.
The multi-spot touch screen should be connected before installation.
3.
Close the antivirus programme and Trojan preventing programme before installation (as 360
antivirus and 260 safeguard).
4.
If the used driver has been installed in the computer before, please unload the installation
completely and, if needed, delete the old installation files.
5.
Standard USB extension cord should be used as USB connector cable.
6.
If you use Windows XP processing system, you should first install Microsoft.net Framework 2.0.
7.
After the VGA and HDMI connections of the screen and server connections are unplugged and
plugged again, the USB connection of touch screen should also be unplugged and plugged again.
Otherwise, touch system will not function properly.
8.
After the USB connection is ready, the driver will be loaded automatically and the touch screen will
be ready to use.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vestel 84 Interactive Flat Panel Display wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info