Bedienungsanleitung Victron Phoenix 48 500 Omvormer (Seite 4 von 55) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

785426

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

EN NL FR DE ES Appendix

1. Safety instructions

WARNING: ELECTRIC SHOCK HAZARD

The product is used in conjunction with a permanent energy source (battery). Input and/or output

terminals may still be dangerously energized, even when the equipment is switched off. Always

disconnect the battery before carrying out maintenance or servicing the product.

The product has no internal user-serviceable components. Do not remove the front plate or

operate the product if any panels have been removed. All servicing must be undertaken by

qualified personnel.

Please read the installation instructions in the installation manual before installing the equipment.

This is a Safety Class I product (supplied with a protective grounding terminal). The chassis must

be grounded. A grounding point is located on the outside of the product. Whenever it is likely that

the grounding protection has been damaged, the product must be turned off and secured against

unintended operation; please contact qualified service staff.

The AC output is isolated from the DC input and the chassis. Local regulations may require a true

neutral. In this case one of the AC output wires must be connected to the chassis, and the

chassis must be connected to a reliable ground. Please note that a true neutral is needed to

ensure correct operation of an earth leakage circuit breaker.

Ensure that the equipment is used under the correct ambient conditions.

Never operate the product in a wet or dusty environment.

Never use the product where there is a risk of gas or dust explosions.

Ensure there is adequate free space (10 cm) for ventilation around the product and check that the

ventilation vents are not blocked.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the appliance.

2. Description

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets and other devices (VE.Direct to Bluetooth Smart

dongle needed)

Fully configurable

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level

Monitoring

Battery voltage, AC Output voltage and current, alarms

Proven reliability

The full bridge with toroidal transformer topology has proven its reliability over many years.

The inverters are short circuit proof and protected against overheating, whether due to overload or

high ambient temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Victron Phoenix 48 500 Omvormer Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info