I can’t hear my FM/AM radio although it is connected
Ensure that you have connected your FM/AM radio to your DRX-601ESM and your DRX-601ESM to
your amplifier correctly, as described on page 6.
Ensure that your FM/AM radio and amplifier are switched on and that the FM/AM radio is tuned to a
station.
Ensure that your DRX-601ESM is switched off. The DRX-601ESM allows your FM/AM radio to pass
through the analogue outputs to your amplifier only when it is switched off.
I can’t hear the station I have selected on the display
To hear the station you need to confirm your selection by pressing the large tuning knob, as described
on page 9, or the SELECT button on your remote control.
I hear a ’burbling’ sound on some stations
Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the
signal strength is too low. If that happens, a ‘burbling’ sound can sometimes be heard.
To help reduce this, check your aerial connection and position, as described on page 7.
If the problem persists, then a signal booster may be the solution - these are available from our on-
line store at www.videologic.com
For the latest troubleshooting information and a list of Frequently Asked Questions (FAQs), visit the
DRX-601ESM support section on our website at www.videologic.com/pure.
17
