Bedienungsanleitung Videologic DRX-602ES (Seite 9 von 15) (Englisch)

529135

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Using the remote control

This section provides information on using the remote control. The infrared remote control provides access to the main functions of your DRX-602ES

and also advanced facilities such as presets and dynamic range control. Before using your remote, insert the supplied batteries. Aim the remote

control at the sensor on the display panel on your DRX-602ES.

Buttons (1-9) and the STORE button enable you to store your favourite radio services for easy access.

To store a service

While listening to the service you want to store.

1. Press the STORE button. The display on your DRX-602ES shows PRESET_ _?

2. Press the number (from 1 to 99) under which you want to store the preset.

3. Press the SELECT button to confirm your selection.

To recall a previously stored service

Press the numbered button(s) under which you stored the service.

The DRC Dynamic Range Control button enables you to alter the dynamic range of the received audio (dependent on

broadcast material) by making the quieter sounds in a broadcast more audible. This may be useful in noisy

environments or particularly quiet parts of programmes.

Press the DRC button to check whether DRC is available for the current service then press the DRC button again to

toggle DRC on or off. The default setting is off.

Press the DISPLAY button and repeat or hold down to cycle through the four display options.

This button performs the

same function as the Display button on the main unit. See Using your DRX-602ES: Changing the display for details.

The INFO button enables you to change the information mode on your DRX-602ES. This button performs the same

function as the Info button on the main unit, see Using your DRX-602ES: Viewing extra information for details.

Press the INFO button and repeat or hold to view the two information modes.

The !" and SELECT buttons enable you to cycle through and select services. Together, these buttons perform the

same function as the large tuning button on the main unit, see Using your DRX-602ES: Selecting a service for details.

1. Press and release or hold the ! or " button to cycle through the stored services.

2. The bottom line of the display on your DRX-602ES shows the service names.

3. Press the SELECT button to select and listen to the displayed service.

The PRI/SEC button enables you to select between the primary and secondary services where secondary services are

available. If a secondary service is available for the current service, the Secondary LED will light up on the front of your

DRX-602ES. Press the PRI/SEC button and repeat or hold to cycle through the available services. For an explanation

of primary and secondary services, see Guide to Digital Radio.

The MUTE button is a quick way of reducing the output volume from your DRX-602ES.

1. Press the MUTE button to mute the sound. The display on your DRX-602E shows MUTE.

2. Press any key on the remote control or main unit to return to the previous listening volume.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Videologic DRX-602ES Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Videologic DRX-602ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info