Bedienungsanleitung Vonroc DS501AC (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Türkisch)

764083

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

WWW.VONROC.COM

• Hold the machine by the insulated gripping

surfaces where the accessory may contact hid-

den wiring or the mains cable. If the accessory

contacts a ‚live‘ wire, the exposed metal parts

of the machine can also become ‚live‘. Risk of

electric shock.

• Be very careful when sanding painted surfaces.

• Before use, remove all nails and other metal

objects from the workpiece.

• Make sure that the workpiece is properly sup-

ported or ﬁxed.

• Only use sanding paper that is suitable for use

with the machine.

• Only use sanding paper with the correct

dimensions. Make sure that the sanding paper

is properly mounted.

• Inspect the sanding paper before each use.

Do not use sanding paper that is worn because

of prolonged use.

• Never put the machine down on a table or a

workbench before it has been switched off.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate label.

• Do not use the machine if the mains cable or the

mains plug is damaged.

• Only use extension cables that are suitable for

the power rating of the machine with a minimum

thickness of 1.5 mm

. If you use an extension

cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

The machine is designed for sanding walls and

ceilings, for sanding smoothed drywalls, for remo-

ving paint, wallpaper and adhesive remnants. It is

not permitted to use cutting-off wheels, roughing

wheels, fan-like grinding wheels or wire brushes. The

machine is not suitable for processing objects con-

taining asbestos. Improper use may damage the tool.

TECHNICAL SPECIFICATIONS

Model No. DS501AC

Voltage 230-240V ~

Frequency 50 Hz

Power input 750W

No-load speed 1500-2700/min

Sanding pad diameter Ø 175 mm

Sanding paper diameter Ø 180 mm

Weight 2.2 kg

Sound pressure level L

74+3 dB(A)

Acoustic power level L

85+3 dB(A)

Vibration

3.84+1.5 m/s

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

Fig. A

1. On/off switch

2. Rear handle

3. Lock-on button

4. Speed adjustment wheel

5. Side handle

6. Dust extraction port

7. Suction power adjustment wheel

8. Side handle connection point

9. Removable front lid

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc DS501AC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info