Bedienungsanleitung Vonroc PM502AC (Seite 5 von 28) (Deutsch, Englisch, Holländisch, Französisch)

764131

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

WWW.VONROC.COM

torque that can cause kickback. The tool insert

jams when:

- the power tool is subject to overload or

- it becomes wedged in the workpiece.

•

Do not mix food. Power tools and their accessories

are not designed for processing food.

• Keep the cord away from the working area.

The cord may be entangled by the stirrer whisk.

•

The mixing container must be suitable for mixing

and must stand securely. A container that is not

properly secured may move uncontrolled.

• Ensure that no liquid splashes against the

housing of the power tool. Liquid that has

penetrated the power tool can cause damage

and lead to electric shock.

•

Follow the instructions and warnings in the Mate-

rial Safety Data Sheets (MSDS) of the material to

be mixed. Material to be mixed may be harmful.

• In the event of a power interruption, release the

locking switch by pressing the on/off switch.

This will prevent the power tool from restarting

unintentionally (risk of injury).

• Do not use the power tool in a stand.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate label.

• Do not use the machine if the mains cable or the

mains plug is damaged.

• Only use extension cables that are suitable for

the power rating of the machine with a minimum

thickness of 1.5 mm

. If you use an extension

cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

The machine is intended for mixing pulverised buil-

ding materials such as mortar, plaster, adhesives,

as well as solvent free paint, varnish and similar

substances. Improper use may damage the tool.

TECHNICAL SPECIFICATIONS

Model No. PM502AC

Voltage 230-240V ~

Frequency 50Hz

Power input 1800W

No-load speed Gear 1

Gear 2

180-400/min

300-700/min

Tool mount M14

Whisk Ø 140mm

Weight 4.45 kg

Sound pressure level L

87.6+3 dB(A)

Acoustic power level L

98.6+3 dB(A)

Vibration

5.187+1.5 m/s

Vibration level

The vibration emission level stated in this instruction

manual has been measured in accordance with a

standardized test given in EN60745; it may be used to

compare one tool with another and as a preliminary

assessment of exposure to vibration

when using

the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

1. On/off switch

2. Lock-on button

3. Speed adjustment wheel

4. Gear selector switch

5. Tool holder

6. Handle

7. Ventilation apertures

8. Whisk shaft

9. Whisk paddle

3. ASSEMBLY

Assembling the two-part whisk (Fig. A)

1. Screw the Whisk shaft (9A) onto the Whisk

paddle (9B)

2. Tighten both parts securely

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PM502AC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info