Bedienungsanleitung Vonroc S-CD509DC (Seite 7 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

763968

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

WWW.VONROC.COM

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

1. Machine

2. Battery

3. Battery unlock button

4. Worklight

5. On/ off switch

6. Chuck collar

7. 1/4” (6.35 mm) hex chuck

8. Direction switch

9. Belt hook

10. Battery LED indicators button

11. Battery LED indicators

12. Charger

13. Charger LED indicators

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst use.

Inserting the battery into the machine (Fig. B)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

Insert the battery (2) into the base of the machine

as shown in Fig. B.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. B)

1. Push the battery unlock button (3).

2. Pull the battery out of the machine like shown

in Fig. B.

Checking the battery charging status (Fig. C)

• To check the battery charge status, push the

button (10) on battery shortly.

•

The battery has 3 lights indicating the charge

level, the more lights that burn, the more charge

the battery has left.

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. C)

1. Take the battery (2) from the machine.

2. Turn the battery (2) to upside down position and

slide it onto the charger (12) as shown in Fig. C.

3. Push the battery until it is fully pushed into the

slot.

Plug the charger plug into an electrical outlet and

wait for a while. The LED indicators on the charger

(13) will lighten up and show the charger status.

The charger has 2 LED indicators (13) which indi-

cate

the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inser-

ted but charging

has ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Removing and mounting accessories

Use only 1/4” (6.35 mm) hex impact

accessories. Non-impact accessories may

break and cause a hazardous condition.

Inspect accessory prior to use to ensure

that it contains no cracks.

Place the direction switch (8) in the lock-off

(centre) position or remove battery pack before

changing accessories. To install an accessory,

fully insert the accessory. The accessory is locked

into place. To remove an accessory, pull the chuck

collar (6) away from the front of the tool. Remove

the accessory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S-CD509DC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info