Bedienungsanleitung Vonroc WL501DC (Seite 5 von 16) (Deutsch, Englisch, Holländisch, Französisch)

764116

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

WWW.VONROC.COM

The following charger of the can be used to charge

these batteries.

CD802AA Quick charger

The batteries of the VONROC POWER 20V battery

platform are interchangeable with all the VONROC

POWER 20V battery platform tools.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-3.

1. On/Off switch

2. Lamp head

3. Lens plate

4. Carrying handle

5. Battery unlock button

6. Battery (not included)

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst

use.

Inserting the battery into the machine (Fig. B)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (6) into the base of the machi-

ne as shown in Fig. B.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. B)

1. Push the battery unlock button (5)

2. Pull the battery out of the machine like shown

in Fig. B.

4. OPERATION

On/Off switch (Fig. A)

• Press the on/off switch (1) once to turn the

work light on.

• Press the on/off switch (1) again to turn the

work light off.

Pivoting head (Fig. C)

The pivoting head (2) can be positioned within a

range of 128º as desired by swiveling it up or

down.

Setting the angle of diffusion (Fig. D)

You can set the angle of diffusion by turning the

lens plate (3) to one of 2 positions.

Carrying handle (Fig. E)

The cordless work light can be carried or fastened

to an object with the carrying handle (4).

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/

EC for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc WL501DC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info