729744
5
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
5
20. Power supply
Connect the supplied power adapter AC12Volt.
21. Phones Input
Connect your headphones with a 6.35mm stereo jack (output signal is main mix).
22. Master Output
Adjust the overall output level of the mixer.
23. Line 4 Input
Line input connector for the audio input source e.g. mixer, CD player, etc.
24. Line 3 Input
Line input connector for the audio input source e.g. mixer, CD player, etc.
25. Line / Phone 2 Input
Line input connector for the audio input source e.g. mixer, CD player, etc.
26. Line / Phone 1 Input
Line input connector for the audio input source e.g. mixer, CD player, etc.
27. Microphone input 1
6.3mm ¼” input jack for connecting a microphone.
28. Microphone input 2
6.3mm ¼” input jack for connecting a microphone.
USB/MP3/BT-PLAYER
Mode
This button let you select the mode of USB channel. The two (green/red) mode LEDS will indicate the actual device status.
Press the MODE button several times to step to your desired function.
Mode
BT LED
USB Play mode
On
BT mode
Connection search
Flash
Connecting
On
Record mode
Ready
On
Recording
Off
Play
On
USB
Press MODE button until status LEDs display BT LED=ON/REC LED=OFF. The USB storage device (USB stick) is placed into
USB socket. The player is ready to work.
Press for switching between play and pause the music.
Press shortly for select next or previous song or press and hold for more than 3 seconds for fast forward or
backward.
BT
Press MODE button until LEDs display BT LED =FLASH/ REC LED =OFF. The BT player is searching for a connection. If the
device which already had a connection in the past is still active, the connection will be made and LEDs change to ON/ON. The
BT player is now ready to work.
For first connection use your BT player (e.g. smartphone) and search for „STM3025“. In BT mode PLAY/ PREV/NEXT functions
can be used on DJ-Mixer or on your BT device to control.
Press for switching between play and pause the music.
Press shortly for select next or previous song or press and hold for more than 3 seconds for fast forward or
backward.
Record
Put the USB storage device (USB stick) into USB port. Press MODE button until status LEDs display BT LED =Off/ REC LED
=FLASH. Mixer is ready for record. Press any player button for stop the recording.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vonyx STM3025 - 172.970 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info