Bedienungsanleitung Vornado 293HD (Seite 5 von 13) (Englisch)

774080

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

parts. Only original replacement parts may be used. Contact

Vornado Consumer Service at 1-800-234-0604 (phone) or

consumerservice@vornado.com (email) for further instructions

about replacement and repair.

- Risk of re. Your appliance may be equipped with a detachable

power supply or a cord/plug with a safety device such as a fuse.

Use only the power cord and plug provided.

- Before plugging power cord into electrical outlet, be sure that

all electrical information on the rating label, including voltage, is

compatible with your outlet’s power supply.

- Never use the cord as a handle or otherwise yank, strain or

stretch the power cord.

- While the product is plugged in, do not insert or allow foreign

objects to enter any input or output opening as this may cause

risk of electric shock or re, or damage the product.

- A loose t between wall outlet (receptacle) and plug may cause

overheating and distortion of the plug. Discontinue use of the

product in this outlet. Contact a qualied electrician to replace

loose or worn outlets.

This product's power cord is equipped with a three-prong,

grounded plug that must be inserted into a grounded

receptacle.

- Before moving, repositioning, servicing, cleaning and when not

in use, use the product controls to turn off the power and then

unplug. To disconnect from outlet, grasp and pull only the plug.

Also, power off and unplug if the product will be left unattended

for an extended period of time or during electrical storms.

SERVICING WARNING—To reduce risk of re, electrical shock

and injury to persons, observe the following:

- Clean your product regularly, only as is instructed in this manual.

Prior to cleaning, turn off the power on your product and unplug.

Do not use gasoline, thinners, solvents, ammonias or other

chemicals for cleaning. Refer to the CLEANING

instructions provided.

- Do not open appliance housing. To avoid risk of shock, all

service and/or repairs must be done by a Vornado Authorized

Service Center.

- This product employs overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation. If the fuse blows,

unplug the product from the outlet. Replace the fuse as per the

user servicing instructions (follow product marking for proper

fuse rating) and check the product. If the replacement fuse

blows, a short-circuit may be present and the product should

be discarded or returned to an authorized service facility for

examination and/or repair.

User Servicing Instructions

1. Using the product controls, turn off the appliance.

2. Grasp the plug (not the cord) and disconnect from the

outlet.

3. Risk of Fire. Replace fuse only with 5 Amp, 125 Volt fuse as

approved by Vornado Consumer Service. For an authorized

replacement fuse, please contact Vornado Consumer

Service.

4. Once the replacement is received, use a small at-head

screwdriver to slide open the fuse cover (located on the

plug) (See Page 6, Fig. A).

5. Remove fuse by using the screwdriver to gently lift each

end of the fuse (See Page 6, Fig. B).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vornado 293HD Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info