540479
4
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
67
Customizable Rotational Stop (CRS)
Vortex Viper PST riflescope elevation turrets incorporate the
unique CRS rotation stop feature. After the rifle is sighted in,
the design of the CRS allows a shooter to quickly and easily
return to an original zero point when using the elevation turret
to dial-in temporary bullet drop corrections.
The CRS feature is particularly useful when dialing large
multi-revolution elevation corrections. Without this feature,
the shooter must pay very careful attention when dialing these
large corrections. If the shooter loses track of the number of
revolutions, the original zero point may become lost when
returning the adjustment.
Viper PST riflescopes equipped with
the CRS allow the elevation dial to be quickly spun back to
original zero without having to carefully count revolutions or
clicks.
Once the CRS shims are installed after sight-in, the elevation
dial will stop turning shortly past the original zero point when
being returned (turning clockwise direction) from a temporary
elevation adjustment. The shooter can then turn the elevation
knob a partial turn in a counter-clockwise direction until the
zero reference and radius bar are correctly alignedachieving
the original zero point.
See CRS shim installation in the
Bore Sighting and Final Range
Sight-in sections.
CRS Shims
This Viper PST riflescope does not have a parallax focus.
The focus is factory pre-set at a distance of 100 yards.
About Parallax
Parallax is a phenomenon that results when the target
image does not quite fall on the same optical plane as the
reticle within the scope. When the shooter’s eye is not
precisely centered in the eyepiece, there can be apparent
movement of the target in relation to the reticle, which can
cause a small shift in the point of aim. Parallax error is most
problematic for precision shooters using high magnification.
At distances over 100 yards parallax error is minimal; using
good consistent shooting form and cheek weld will prevent
most error problems with parallax.
Subtension
Multiplier Markings
Magnification
Markings
MagView
Variable Power Adjustments
To change magnifications, turn the magnification
ring to the desired
level. The patented
Vortex MagView
will provide a low
light reference
for magnification
level.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vortex Viper PST wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info