Test the sound level and position the HD video monitor
mount the camera unit (optional)
1
Connect, charge and power on the baby
monitor (Con’t)
2. Adjust the angle of the camera to aim at your baby. Refer to the online
manual on how to use the Pan/tilt and Zoom functions of the camera.
3. To avoid causing high-pitched screeching noise from your HD video
monitor:
• Make sure your camera unit and parent unit are more than 10 feet
(3 meters) apart; OR
• Turn down the volume of your parent unit.
To keep this product working well and looking good, follow these guidelines:
• Avoid putting it near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft cloth.
• DO NOT immerse the parent unit and the camera unit in water and do not clean them under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the parent unit and the camera unit are dry before you connect them to the mains again.
When you are not going to use the HD video monitor for some time, store the parent unit, the camera
unit and the adapters in a cool and dry place.
Below are the questions most frequently asked about the HD video monitor. If you cannot find the
answer to your question in the below table, visit our website atwww.vtechphones.com, or call
1-844-848-8324 (1-844-84-VTECH) for customer service. In Canada, go to www.vtechcanada.com or
call 1-888-211-2005.
Can I turn off the
parent unit screen but
keep hearing sound
from the camera unit?
Press LCD ON/OFF to turn off the screen display without powering off the parent
unit. You can still hear sound from the camera unit if the camera is streaming and
the speaker volume of the parent unit is turned on.
Why does the camera
unit not respond
normally?
Try the following (in the order listed) for common cure:
1. Disconnect the power to the camera unit.
2. Wait a few minutes before connecting power back to the camera unit.
3. Reboot the parent unit.
Why is my screen in
black and white?
The camera unit has a light sensor that measures the ambient light. When the
ambient light is dim, such as during nighttime or in a dark room, the camera
activates its infrared LEDs, and displays the camera view in black and white.
Why does my camera
show offline? Why is
the connection lost
every now and then?
The camera unit may lose the Internet connection. Check your network and the
router setting.
Other electronic products may cause interference with your camera. Try installing
your camera as far away from these electronic devices as possible.
Why don’t I hear a
sound/Why can’t I
hear my baby cry?
The parent unit speaker volume may be too low. Press VOL + to increase the
volume.
You may have set a low VOX sensitivity level. Set the VOX sensitivity to a higher
level. For details, refer to the online manual.
Frequently asked questions
General product care
Storage
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the
Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship,
pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product
operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United
States of America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty
period (“Materially Defective Product”)?
During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without
charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we
choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will
retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or
replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the
repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is
shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal
operation or handling, neglect, inundation, fire, water or other liquid intrusion; or
2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service
representative of VTech; or
3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna
systems; or
4. Product to the extent that the problem is caused by use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed,
altered or rendered illegible; or
6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used
for commercial or institutional purposes (including but not limited to Products used for rental purposes); or
7. Product returned without a valid proof of purchase (see item 2 on the following part); or
8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1-844-848-8324
(1-844-84-VTECH). In Canada, go to www.vtechcanada.com or call 1-888-211-2005.NOTE: Before calling for service,
please review the user’s manual - a check of the Product’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are
responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will
return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid.
VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you
authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for
the repair of Products that are not covered by this limited warranty.
What must you return with the Product to get warranty service?
1. Return the entire original package and contents including the Product to the VTech service location along with a
description of the malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of
purchase or receipt; and
3. Provide your name, complete and correct mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral
communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively
describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized
to make modifications to this limited warranty and you should not rely on any such modification.State/Provincial Law Rights:
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to
province.
Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty
that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall
VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost
profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims
by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.
Limited warranty
After you have connected the parent unit and the camera unit, refer to the Quick start guide included in your package to
set up your HD video monitor system.
HD video monitor setup:
• Set up Wi-Fi connection
• Add camera
Before you install your camera unit, you need to test which of your selected monitoring areas within the house have good
Wi-Fi signal strength. After you have powered on your parent unit, you can use your parent unit’s Wi-Fi signal strength
indicator to assist in checking. Once you have identified the suitable location, you can install your camera unit. Adjust the
distance between your camera unit and the Wi-Fi router if needed.
• Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may
experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your parent unit. Check with
your parent unit again.
• This HD video monitor is intended as an aid. It is not a substitute for proper adult
supervision, and should not be used as such.
Testing the sound level of the HD video monitor
• For hearing protection, make sure the parent unit is more than 10 feet
(3 meters) away from the camera unit. If you hear any high-pitched noise
from the parent unit, move the parent unit further until the noise stops.
You can also press - VOL on the parent unit to lower or mute the noise.
• Increase the parent unit speaker volume if you cannot hear the sounds transmitted
from the camera unit.
Positioning the HD video monitor
• Keep the camera unit out of the reach of your baby. Never place or mount the
camera unit inside the baby’s crib or playpen.
1. Place the camera unit more than 3 feet (1 meter) away from your baby.
> 3ft (1m)
>
3ft (1m)
<
3ft (1m)
1. Place the wall mount bracket on a wall and then use
a pencil to mark the top and the bottom holes as
shown. Remove the wall mount bracket and drill
two holes in the wall
(7/32 inch drill bit).
NOTESNOTE
Notes
• Check for reception strength and camera angle before drilling the holes.
• The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your camera units.
2. If you drill the holes into a stud, go to step 3.
• If you drill the holes into an object other than a stud, insert the wall
anchors into the holes. Tap gently on the ends with a hammer until the
wall anchors are flush with the wall.
3. Align the wall mount bracket and screws with the
holes in the wall as shown. Tighten the screw in the
middle hole first, so that the wall mount bracket
position is fixed. You can tighten the other screw in
the top hole.
3. Insert the screws into the holes and tighten the screws until only 1/4 inch
of the screws are exposed.
4. Place the camera unit on the wall mount
bracket. Tighten the screw into the threaded
socket at the bottom to secure the camera
unit. Align the holes on the wall mount
bracket with the screws on the wall, and slide
the wall mount bracket down until it locks into
place.
5. You can maximize your camera unit’s viewing angles by tilting the wall mount bracket.
Hold the camera unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket.
Tilt your camera unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and
secure the angle.
OR
4. Place the camera unit on the wall mount bracket.
Tighten the screw into the threaded socket at the
bottom to secure the camera unit.
Charge the battery before use
• The parent unit is fully charged after 4 hours of continuous charging.
• It takes longer to charge when the parent unit is turned on. To shorten the charging time, turn the
parent unit off while charging.
• The standby time varies depending on your actual use.
After the parent unit is fully charged, press and hold POWER until the VTech logo appears
on screen to power on.
The battery icon indicates the battery status (see the following table).
Battery indicatorsBattery statusAction
The battery icon is off and
displays .
No battery is installed but
operates using AC power, or
the battery has been installed
incorrectly.
Install the parent unit battery.
Charge without interruption
(at least 30 minutes).
The screen displays
Battery low at Parent Unit
and . The light
flashes.
The battery has very little
charge and may be used for
only a short time.
Charge
without interruption
(about 30 minutes).
The battery icon becomes
solid .
The battery is fully charged.To keep the battery charged,
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für VTech RM5762 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
