7
GB
Instruction for use
Your cooling device can be operated with 12V DC. Prior to connection check
whether the voltage indication on the rating plate is in accordance with the battery
voltage.
Connect your cooling device using the supplied DC cord to plug in the cigarette
lighter socket of your car, boat or caravan as shown in the diagram below.
Note: High-speed battery chargers may only be connected to the battery
after the cooling device and all other consumers have been disconnected
from the battery.
Overvoltage could cause damage to the electronic of the units.
Operation from the mains
Fridgemaster DC
In case you want to operate the cool box indoors from the AC mains, please use
the MOBITRONIC approved AC/DC adapter.
Fridgemaster AC/DC
Your cool box is equipped with an integrated multi voltage power supply AC
and can be connected directly to the alternating current. The integrated power
supply is equipped with an automatic switchover to mains supply when the unit
is connected to, although the DC cable still is connected. This is why the socket
should be installed close to the unit and be easily accessible.
After the safety device has been triggered parts of the equipment may be
under voltage.
Cleaning
Your cooling device will be delivered cleaned from the factory – you nevertheless
should clean prior to initial use. Take a cloth which has been slightly moistened
with lukewarm water. Pay attention that no water drops into the seals and possibly
damages the electronics. Dry off the cooling device with a cloth after cleaning.
Clean the device periodically and as soon as it is dirty.
Attention: Never use solvents or agents with sand or acid parts for
cleaning the cooling tank. Never use brushes, graters or hard and sharp
tools.
