USING THE DEHYDRATOR
Fill the trays
Open the door, slide out the trays and fill them with the required food. Do not overfill the
trays and make sure nothing sticks out at the back that can block the ventilator. Slide the trays
back in and close the door.
Set the temperature
Press the temperature button, the display shows the set temperature. Use the + and
- buttons to set the temperature to the desired value. To quickly change the required
temperature, hold down the + or – buttons. The temperature range for the Wartmann®
dehydrator can be set between 35˚to 80˚C.
Set the time
Press the time button, the display shows the remaining time. Use the + and
- buttons to set the remaining time to the desired value. To quickly change
the remaining time, hold down the + or – buttons. The duration for the Wartmann®
dehydrator can be set from 30 minutes up to 24 hours.
Start the dehydrator
Press the Start/Stop button to start the dehydration programme. Press the
button one more time will halt the programme.
Take out your food
Once the set time has been reached the dehydrator will automatically stop. Open the door
and take out your trays. Be careful, the trays may still be hot. If necessary, use some oven
wants or utensils to take the trays or food out of the dehydrator.
Interrupt a dehydration
At any time you can stop a dehydration by pressing the Start/Stop button. The display
will return to “OFF”. After a few minutes, when the heater has cooled of sufficiently,
the fan will stop running.
