727489
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
UNIVERSAL A/C REMOTE CONTROL
SETTING OF THE REMOTE CONTROL
A) Point-to-point quick search (only for major brands)
1. Aim the remote control towards the air conditioner receiver window.
2. Press and hold the appropriate code button corresponding to your A/C
brand (for example ▲ button for LG and Samsung brand) until the air
conditioner turns on and you hear a ‘beep’ sound; release the button
and the setting is completed.
3. Check the button functions. If the buttons work correctly, the code setting is
effective. If not, please repeat steps 2 and 3.
Brand Code Button Table
B) Manual Code Input
1. Connected to www.wellclima.com website, nd air conditioner brand in the
‘CODE LIST’ of PLUS model and check the rst set of codes.
2.
Press and hold SET button, then press POWER button and hold them down. Release
the two buttons when the model code ‘---’ ashes on the screen window. Press
TEMP▲ or ‘TEMP▼ until the code found in Step 1 appears on the screen window
(you can keep the TEMP keys pressed to scroll the codes faster).
3.
Press the SET button to exit, check the button functions. If the device respond cor-
rectly the setting is nished, if not, please repeat steps 2 and 3 with next set of codes.
LOOK OUT:
when the codes are separated by a - sign it means all the numbers betwe-
en the rst and the last (es LG 600-609 you have to test codes 600, 601, 602.....>609).
If none of the codes work with your air conditoner or if your brand is not in the
list don’t worry, proceed with the Automatic Code Search
HEAT COOL A
B
C
TEMP TEMP
FAN
MODE
Manual
Wind
Auto
Wind
CHIGO/TCL
MIDEA
CHANGHONG
FRESTECH
YAIR
HISENSE
KELON
CHUNLAN
AUX
HAIER
MITSUBISHI
LG
SAMSUNG
SHINCO
AUCMA
DAIKIN
CARRIER
GREE
HUALING
HITACHI
PANASONIC
SHARP
SANYO
E.A.Heating
K-209ES
wellclima PLUS
Instruction Manual
The remote control can be set to 3 different modes. Choose mode A if the brand of your air conditio-
ner is among those in the image below, or modes B or C for all other brands.
C) Automatic Code Search for applicable model
1. Aim the remote towards the air conditioner receiver window.
2. Press and hold SET button, about 6 seconds later the model code ’---‘ starts to
ash, do not release the button until the air conditioner switches on automatically.
3. Release the SET button immediately when the conditioner turns on and check the
button functions. If the buttons work correctly, the code setting is effective. If not,
please repeat steps 2 and 3.
4. A complete scan of all codes takes about 30 minutes. Do not stop the search before,
or before the air conditioner switches on.
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Wellclima K-209ES wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info