Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
35
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    INSTRUCTIONS FOR USE

    BEFORE USING THE DISHWASHER/
    CONNECTIONS
    ELECTRICAL CONNECTION
    PRECAUTIONS AND GENERAL
    RECOMMENDATIONS
    HOW TO FILL THE SALT CONTAINER
    HOW TO FILL THE RINSE AID DISPENSER
    HOW TO FILL THE DETERGENT DISPENSER
    CARE AND MAINTENANCE

    35



  • Page 2

    BEFORE USING THE DISHWASHER/
    CONNECTIONS
    1. Removing the packaging and controls:
    After unpacking, make sure that the dishwasher is
    undamaged and that the door closes correctly. If in
    doubt, contact a qualified technician or your local
    retailer.
    • Keep the packaging materials (plastic bags,
    polystyrene parts, etc.) out of reach of children, as
    they are potentially dangerous.
    • This dishwasher has been factory tested to ensure
    it functions correctly.
    Such testing may leave slight water marks that will
    disappear with the first wash.
    2. Water and electrical connections:
    All water and electrical connections must be
    carried out by a qualified technician in compliance
    with the manufacturer's instructions (refer to the
    enclosed installation booklet) and current local
    safety regulations.
    The appliance must only be used in the household
    for the prescribed uses.
    Do not use the dishwasher if it has been damaged
    in transit. Consult your local retailer or our AfterSales Service.
    (Refer to the separate installation
    instructions booklet)
    3. Water inlet and drain:
    • Observe any special regulations issued by your local
    Water Board.
    Water supply pressure: 0.3 - 10 bar.
    • Make sure the inlet and drain hoses are kink-free
    and are not crushed.
    • If the hose length is not sufficient, please contact
    your local dealer or our After-Sales Service.
    • The inlet hose must be securely clamped to the
    water tap to prevent leaks.
    • The inlet water temperature varies according to
    the model installed. Inlet hose marked “25°C Max”:
    maximum temperature 25°C.
    All other models: maximum temperature 60°C.
    • When installing the appliance, make sure the drain
    water discharges correctly (if necessary, remove
    the wire gauze from the sink siphon).
    • Fix the drain hose to the spigot with a clamp to
    prevent it from coming off during operation.
    For appliances with water-stop system only: If the
    water connections are made correctly, the waterstop system safeguards your home against damage
    caused by flooding.
    36

    4. Electrical connection:
    • Closely adhere to local Electricity Board
    regulations.
    • Voltage information is shown on the rating plate
    mounted inside the door on the right hand side.
    • The appliance must be earthed as prescribed by law.
    • Do not use extension leads or multiple adapters.
    • Before carrying out maintenance, disconnect the
    mains plug.
    • If necessary, the power cable may be replaced with
    one the same obtained from our After-Sales
    Service. The power cable must only be replaced by
    a qualified technician.
    Warning for models provided with LCD
    display:
    The mains plug must be positioned in an easily
    accessible place.
    • For Austria: if the apparatus is series connected to
    a fault current switch, this must be sensitive to the
    pulsating current.



  • Page 3

    ELECTRICAL CONNECTION
    1) For Great Britain only
    Warning - this appliance must be earthed
    Fuse replacement
    If the mains lead of this appliance is fitted with a BS 1363A 13amp
    fused plug, to change a fuse in this type of plug use an A.S.T.A.
    approved fuse to BS 1362 type and proceed as follows:
    1. Remove the fuse cover (A) and fuse (B).
    2. Fit replacement 13A fuse into fuse cover.
    3. Refit both into plug.
    Important:
    The fuse cover must be refitted when changing a fuse and if the fuse
    cover is lost the plug must not be used until a correct replacement is
    fitted.
    Correct replacement are identified by the colour insert or the colour
    embossed in words on the base of the plug.
    Replacement fuse covers are available from your local electrical
    store.

    2) For the Republic of Ireland only
    The information given in respect of Great Britain will frequently
    apply, but a third type of plug and socket is also used, the
    2-pin, side earth type.

    3) Socket outlet / plug (valid for both countries)
    If the fitted plug is not suitable for your socket outlet, please contact
    Whirlpool Service for further instruction. Please do not attempt to
    change plug yourself. This procedure needs to be carried out by a
    qualified Whirlpool technician in compliance with the manufactures
    instructions and current standard safety regulations.

    37



  • Page 4

    PRECAUTIONS AND GENERAL
    RECOMMENDATIONS
    1. Packing:
    The packing box may be fully recycled as
    confirmed by the recycling symbol
    .
    2. Energy and water saving tips:
    • Do not rinse crockery under running water.
    • Always fully load the dishwasher before switching
    on or set the wash programme to half load/
    Multizone (if available) if one rack only is loaded.
    • If ecological energy sources are available such as solar
    panel heating, heat pumps or centralised heating
    systems, the appliance may be connected to the hot
    water mains up to a maximum temperature of 60°C.
    Make sure the water inlet hose is of the correct type.
    Refer to the “Connections” chapter in these user
    instructions.
    3. Disposal:
    The appliance is built from reusable materials. If
    you decide to scrap the dishwasher, it must be
    disposed of in compliance with local waste disposal
    laws.
    Before scrapping, cut off the power cable so that
    the appliance cannot be connected to the mains.
    • To prevent situations of potential danger to
    children (e.g. danger of suffocation), break the lock
    of the door so that it can no longer be closed.
    4. Child safety:
    • Children must not be allowed to play with the
    dishwasher.
    • Store the detergent, rinse aid and salt in a dry place
    out of the reach of children.
    5. Safety warnings:
    • The open dishwasher door can only support the
    weight of the loaded rack when pulled out. Do not
    rest objects on the open door or sit or stand on it:
    the appliance may topple over!
    • Do not use solvents inside the dishwasher: risk of
    explosion!
    • Sharp knives and forks that might cause injury must
    be placed in the cutlery basket with the sharp end
    facing downwards.
    Long-handled utensils must be arranged
    horizontally in the upper rack, with the sharp end
    facing away from the front of the appliance.
    • Before cleaning or carrying out maintenance,
    switch off the appliance, disconnect the mains plug
    and turn off the water tap.
    38

    • If a fault occurs, switch off the appliance and turn off
    the water tap.
    • On completion of the programme switch off the
    dishwasher and turn off the water tap.
    • Repairs and technical modifications must be carried
    out exclusively by a qualified technician.
    • The water in the dishwasher is not potable.
    • Do not store inflammable liquids near the
    dishwasher.
    • Do not operate the appliance in the open air.
    6. Resistance to frost
    If the appliance is placed in surroundings exposed
    to the risk of frost, it must be drained completely.
    Turn off the water tap, remove the flexible inlet
    and outlet hoses, and let all the water run out.
    7. For appliances with water stop system:
    The water inlet hose and plastic casing contain
    electrical components. Do not therefore cut the
    hose or immerse the plastic casing in water. If the
    hose is damaged switch off the appliance
    immediately.
    8. The appliance must be used at temperatures
    between 5°C and 45°C.
    EC Declaration of conformity
    This appliance has been designed, constructed and
    distributed in compliance with the safety
    requirements of EC Directives:
    • 73/23/EEC
    • 89/336/EEC
    • 93/68/EEC

    Load capacity:
    12 place settings.



  • Page 5

    HOW TO FILL THE SALT CONTAINER
    From a water hardness category of 1–2 (medium), before using the
    dishwasher, fill the salt container with regeneration salt (to find out the
    hardness level of water in your area, contact your local Water Board or
    check the last bill you received).
    If the water hardness level does not correspond to position 3 on the
    selector (factory setting) or if the water hardness level changes:
    Turn the selector to the correct position
    (for dishwashers without salt sensor only):
    Set the water hardness by turning the selector (if fitted) inside the door
    (top left) using a screwdriver.
    Use the table below to set the dial to the correct setting:
    Hardness
    level

    1 soft
    1 - 2 medium
    2 average
    3 medium-hard
    4 hard
    4 very hard
    4 extremely
    hard

    German
    degrees

    French
    degrees

    °dH

    °fH

    0-5
    6 - 10
    11 - 15
    16 - 21
    22 - 28
    29 - 35

    0-9
    10 - 18
    19 - 27
    28 - 37
    38 - 50
    51 - 63

    36 - 60

    64 - 107

    mmol/l

    Clarke scale
    or English
    degrees
    °eH

    Setting

    0 - 0,9
    1.0 - 1.8
    1.9 - 2.7
    2.8 - 3.7
    3.8 - 5.0
    5.1 - 6.3

    0 - 6.3
    7 - 12.6
    13.3 - 18.9
    19.6 - 25.9
    26.6 - 35
    35.7 - 44.1

    0
    1
    2
    3
    4
    5

    6.4 - 10.7

    44.8 - 74.9

    6

    For dishwashers without salt sensor
    only!
    In appliances provided with a salt
    sensor, the selector automatically turns
    to the correct position.

    If the water hardness level falls within
    category 1 (soft), no salt is required.

    How to fill the salt container
    Warning: Only use regeneration salts for use in domestic
    dishwashers!
    Do not fill the salt container with unsuitable substances, such as detergent,
    as this will cause irreparable damage to the water softener system.
    1. Remove the lower rack.
    2. Unscrew the cap by turning it counter-clockwise.
    3. When first using the dishwasher: fill the salt container to the rim with
    water.
    4. Fill the salt container to the rim with salt (using the filler provided)
    (when filling for the first time use min. 1.5 kg and max. 2 kg) and
    stir with a spoon handle.
    5. Screw the cap back on by turning it clockwise.
    6. Fit the lower rack.
    7. If regeneration salt is to be added, immediately start a wash
    programme (rinsing alone is not sufficient) in order to eliminate
    any residual saline solution straight away and avoid corrosion.
    Salt level indicator
    The dishwasher is equipped with an electric or visual salt level
    indicator (depending on the model installed).
    Electric indicator
    The salt level indicator lamp on the control panel lights up when the
    salt container is empty.
    Visual indicator
    The float is clearly visible in the cap window when the salt container is full.
    The float lowers and is no longer visible when the salt container is empty.
    39



  • Page 6

    HOW TO FILL THE RINSE AID DISPENSER
    The rinse aid facilitates drying and prevents the formation of unsightly
    spots and streaks on crockery. Before using the dishwasher for the
    first time, fill the rinse aid dispenser. Only use rinse aids recommended
    for use in domestic dishwashers.
    1. Press button A to open the cover (see drawing).
    2. Fill the dispenser with rinse aid up to the dotted line
    (about 100 ml maximum).
    Immediately wipe away any rinse aid spilt accidentally! This prevents
    the formation of excess suds which may spoil washing results.
    3. Close the cover.
    Thereafter, regularly check the rinse aid level.

    How to adjust the rinse aid dosage regulator
    Factory setting: Position 4.
    If you are not satisfied with washing or drying results, change the rinse
    aid dosage setting.
    1. Press button A to open the cover (see drawing).
    2. If crockery is prone to whitish streaks: reduce the dosage by
    turning the dial to a lower setting (1-3) using a coin or the like. If
    crockery is not perfectly dry: increase the dosage by turning the
    dial to a higher setting (5-6).
    3. Close the cover.
    Rinse aid level indicator:
    Visual indicator:
    add rinse aid
    light
    sufficient rinse aid.
    dark

    Electric indicator (if provided):
    The indicator lamp on the control panel lights up when more rinse aid
    needs to be added.

    40

    A



  • Page 7

    HOW TO FILL THE DETERGENT DISPENSER
    Only use detergents recommended for use in domestic dishwashers.
    Only fill the detergent dispenser prior to starting a wash
    programme (see the Quick Reference Guide).

    C

    1. Press button C to open the cover.
    2. How to fill the detergent dispenser.

    A

    B

    • Programmes with pre-rinse:
    -

    -

    Powder and/or liquid detergent:
    pour two thirds of the recommended dosage into the
    compartment (A);
    pour one third into the compartment (B).
    Tablets:
    place a tablet in the compartment (A) and/or follow the
    directions on the detergent pack.

    • Programmes without pre-rinse:
    -

    Powder and/or liquid detergent, tablets:
    pour the entire recommended dosage into the compartment
    (A).

    • For programmes with additional “Half load/Multizone” function
    selected (if provided):
    -

    When using powder or liquid detergent the dosage can be
    reduced by 1/3.

    3. Close the cover.
    Detergent
    Use good quality liquid or powder dishwasher detergents and/or
    tablets (do not use hand dishwashing detergents).
    In order to safeguard the environment, follow the manufacturer's
    directions for use. Do not use more than the amount of detergent that
    is recommended. Observe the manufacturer's safety warnings.
    Keep these products out of reach of children.
    If you use detergents in tablet form, follow the manufacturer's
    directions for use.
    If you use multi-action dishwasher detergents that incorporate rinse
    aid and regeneration salt, follow the directions below:
    • products that incorporate the rinse aid enhance the detergent
    action only with some programs.
    • products that do not require using regeneration salt may be
    used only in areas with specific water hardness level.
    Read the product user instructions carefully. If in doubt, contact the
    detergent manufacturer.
    The guarantee is not applicable if faults are caused by the use of these
    products.

    41



  • Page 8

    CARE AND MAINTENANCE
    Before cleaning or carrying out maintenance, switch off the appliance,
    disconnect the mains plug and turn off the water tap.
    Cleaning the outside of the appliance:
    To clean the outside of the appliance, use a neutral detergent and a
    damp cloth.
    Clean the control panel with a damp cloth only.
    Do not use abrasive detergents.
    Cleaning the inside of the dishwasher:
    Regularly wipe the door seal and inside of the door with a damp cloth
    to remove any food residue.

    Upper spray arm:
    1. Slacken the fixing nut (A) (by turning it counter-clockwise) and
    detach the spray arm (B) by pulling it down.
    2. Rinse the nozzles.
    3. To remount the spray arm, align it and then tighten the fixing nut
    (by turning it clockwise), paying attention not to bend it.
    The fixing nut must be tightened until it clicks!

    A
    B

    Make sure the spray arm rotates freely.

    Lower spray arm:
    1. Slacken the fixing nut (C) (by turning it counter-clockwise) and
    detach the spray arm (D) by pulling it upwards.
    2. Rinse the nozzles.
    3. To remount the spray arm, align it and then tighten the fixing nut
    (by turning it clockwise), paying attention not to bend it.
    The fixing nut must be tightened until it clicks.
    Make sure the spray arm rotates freely.

    42

    D
    D
    C



  • Page 9

    CARE AND MAINTENANCE
    E

    Cleaning the filters
    1. Rotate the microfilter counter-clockwise (in the direction of the
    arrow “0”) and extract it (E).
    2. Remove the wide-mesh filter (F).
    3. Remove the fine-mesh filter (G).
    4. Clean all filters under running water, paying attention not to bend
    the fine-mesh filter.
    Check that no impurities are left inside the dishwasher!
    5. To reassemble:
    insert the wide-mesh filter into the microfilter so it clicks into
    place. Insert the fine-mesh filter.
    The filter must be fitted under both tabs (H).
    Insert the wide-mesh filter / microfilter unit and turn clockwise
    (in the direction of the arrow “1”), until the dashed lines on the
    microfilter and fine-mesh filter are aligned.

    F

    The filter unit must be correctly assembled to ensure good
    wash results!

    G

    H

    43



  • Page 10

    Ecological Paper
    Printed in Germany

    5019 396 94102

    S

    N

    DK FIN GB

    5/1104






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Whirlpool 6ADP 5550 WH wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Whirlpool 6ADP 5550 WH in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,22 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Whirlpool 6ADP 5550 WH

Whirlpool 6ADP 5550 WH Bedienungsanleitung - Deutsch - 9 seiten

Whirlpool 6ADP 5550 WH Bedienungsanleitung - Holländisch - 9 seiten

Whirlpool 6ADP 5550 WH Bedienungsanleitung - Französisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info