Bedienungsanleitung Whirlpool ACM711 (Seite 5 von 7) (Englisch)

756765

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Switching on and adjusting cooking zones

After switching on the hob and positioning the pot on the

chosen cooking zone, adjust the heat setting using the button

+. When switched on, the display shows level 5.

Each cooking zone has different heat settings that can be

adjusted using the buttons +/-, which go from “1”: min. heat

setting to “9”: max. heat setting. Some cooking zones have a

fast boil function (Booster), shown on the display with the

letter “P”.

Fast boil function (Booster)

This function, only present on some cooking zones, makes it

possible to exploit the hob's maximum power (for example to

bring water to the boil very quickly). To select this function,

press the button “+” until “P” appears on the display or, after

switching the hob on, press the “-” button for the selected

cooking zone. In this case too, “P” appears on the display.

After 10 minutes' use of the booster function, the appliance

automatically sets the zone to level 9.

Switching off cooking zones

Select the cooking zone to be switched off by pressing the “+”

or “-” key (a dot lights up at the bottom right hand side of the

heat setting indicator).

Press the key “-” to set the level to “0”.

The cooking zone can also be switched off by pressing keys

“+” and “-” at the same time. The cooking zone switches off

and the residual heat indicator “H” lights up

Child lock

This function locks the hob controls to prevent accidental

switching on by children. To activate the child lock function,

switch on the hob then press and hold the button for

three seconds: an acoustic signal and a luminous indicator

under the key symbol signal activation. The control panel is

locked with the exception of the OFF function. To unlock the

controls, repeat the child lock activation procedure. The

illuminated dot switches off and the hob is active again.

The presence of cleaning water, liquid spilled from pots or any

objects resting on the button below the symbol can

accidentally activate or deactivate the child lock function.

Timer

The timer can be used to set a max.

cooking time of 99 minutes (1 hour and

39 minutes) for one cooking zone only.

Select the cooking zone to be used with

the timer (an illuminated dot appears to

the bottom right hand side of the heat

setting indicator on the display), then set the desired cooking

time using the buttons “+” and -“-” of the timer function (see

figure above). A few seconds after the button is pressed, the

timer begins the countdown (the luminous dot of the selected

cooking zone starts flashing). Once the set time has elapsed, an

acoustic signal sounds and the cooking zone switches off

automatically.

To deactivate the timer, press the button “-” until the display

shows “0:0” or press the buttons “+” and “-” of the timer at

the same time.

Important! The timer function can only be used with one

cooking zone at a time.

Minute minder

The minute minder can only be used when the hob is not in

use and allows a maximum setting of 99 min.

Press the button “+” below the timer indicators: the display

shows the minutes for setting.

Select the time desired using the buttons + and -.

After a few seconds the minute minder starts to count down.

Once the set time has elapsed an acoustic signal sounds.

Important! The minute minder function can only be used

when the hob is switched off; if it is then switched on, the

minute minder countdown is automatically cancelled.

Control panel indicators.

Residual heat indicator.

The hob is fitted with a residual heat indicator for each

cooking zone. These indicators alert the user when

cooking zones are still hot.

If the display shows , the cooking zone is still hot. If

the residual heat indicator of a given cooking zone is lit, that

zone can be used, for example, to keep a dish warm or to melt

butter.

When the cooking zone cools down, the display switches off.

Incorrect or missing pot indicator.

The hob features an automatic pot detection system

for all cooking zones. If no pot is detected, the display

with the cooking zone power level indicator flashes.

Make sure the pot is correctly positioned and that it

has the characteristics given in the section “Before use”.

Button -

Heat setting indicator

Selected cooking zone

indicator

Button +

Cooking zone

positioning

31902052GB.fm Page 15 Wednesday, September 3, 2008 4:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool ACM711 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ACM711

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info