Bedienungsanleitung Whirlpool ADPU 502 (Seite 2 von 8) (Englisch)

651165

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the reta-

ining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes

and on the machine’s functional components.

• It is important that the salt reservoir be never empty (except when

the water hardness is set to - 1 “Soft”).

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see

Product Description) and should be lled when the SALT REFILL indi-

cator light

in the control panel is lit .

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. Position the funnel (see gure) and ll the

salt reservoir right up to its edge (approxi-

mately 1 kg); it is not unusual for a little wa-

ter to leak out.

3. Remove the funnel and wipe any salt resi-

due away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, we recommend carrying out the

procedure before the washing cycle is started.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential

that the water hardness setting is based on the actual water hard-

ness in your house. This information can be obtained from your local

water supplier.

The factory setting is for avarage (3) water hardness.

1. Switch on the appliance by pressing the ON/OFF button

2. Switch o the appliance by pressing the ON/OFF button

3. Hold down button START/PAUSE for 5 seconds, until you hear a

beep.

4. Switch on the appliance by pressing the ON/OFF button

5. The current selection level number and the salt indicator light

both ash.

6. Press button P to select the desired hardness level (see Water

Hardness Table).

7. Switch o the appliance by pressing the ON/OFF button

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL in-

dicator light switches o.

If the salt container is not lled, the water softener and the

heating element may be damaged as a result (except when

the water hardness is set to - 1 “Soft”).

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser “B”

should be lled:

• When the RINSE AID REFILL indicator light

on the display is lit.

• When the dark optical indicator on the dispenser door “C” becomes

transparent.

1. Open the dispenser by turning the cap “A” in an anticlockwise direction.

2. Pour in the rinse aid, making sure it does not overow from the

dispenser. If this happens, clean the spill immediately with a dry cloth.

3. Screw the cap back on.

NEVER pour the rinse aid directly into the dishwasher.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satised with the drying results, you can

adjust the quantity of rinse aid used. Turn the adjuster “D”.

The factory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes, set a

mid-range number (3-4).

FILLING THE DETERGENT DISPENSER

Open the detergent dispenser and measure out the detergent

according to Programs Table

A Rinse aid dispenser cap

(Unscrew the cap to ll the dispenser).

B Rinse aid dispenser

C Rinse aid level indicator

D Rinse aid dosage adjuster

(You can set up to a max. of 4 levels).

E Lid opening button

(Press to access the containers)

F Cover (Detergent containers)

Remove detergent residues from the edges of the containers

before closing the cover until it clicks.

G Pre-wash detergent container

Detergent for pre-wash (pour in the powder or liquid detergent

after consulting the Programs Table).

H Wash detergent container

Detergent for wash (pour in the powder, liquid or tablet detergent

after consulting the Programs Table).

The detergent dispenser automatically opens up at the right time ac-

cording to the program.

Only use detergent which has been specically designed for

dishwashers. DO NOT USE washing up liquid.

DCGH

Water Hardness Table

Salt

needed

Level

°dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10 NO

2 Medium 6 - 11 11 - 20

YES

3 Average 12 - 17 21 - 30

4 Hard 17 - 34 31 - 60

5 Very hard 34 - 50 61 - 90

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool ADPU 502 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ADPU 502

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info