Bedienungsanleitung Whirlpool ADPU 502 (Seite 4 von 24) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

651165

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

children away during installa-

tion of the dishwasher.

Keep the packaging materials

(plastic bags, polystyrene parts,

etc.) out of reach of children,

during and after the installa-

tion of the dishwasher.

Use protective gloves to per-

form all unpacking and instal-

lation operations.

After unpacking the dishwa-

sher, make sure that it has not

been damaged during trans-

port. In the event of problems,

contact the dealer or your ne-

arest After-sales Service.

The dishwasher must be han-

dled and installed by two or

more persons.

The dishwasher must be

disconnected from the power

supply before carrying out any

installation operation.

During installation, make sure

the dishwasher does not da-

mage the power cable.

Only activate the dishwasher

when the installation procedu-

re has been completed.

Connection to the mains water

supply must be carried out by

a qualied technician in com-

pliance with the manufacturers

instructions and applicable lo-

cal safety regulations.

The dishwasher is to be connec-

ted to the water mains using

new hose sets. The old hose-

-sets should not be reused.

All hoses must be securely

clamped to prevent them co-

ming loose during operation.

All local waterboard regu-

lations must be complied

with. Water supply pressure

0.05 - 1.0 MPa.

The inlet water temperature

depends on the dishwasher

model. If the installed inlet

hose is marked “25°C Max”, the

maximum allowed water tem-

perature is 25°C. For all other

models the maximum allowed

water temperature is 60°C.

Do not cut hoses and, in the

case of dishwashers tted with

a waterstop system, do not im-

merse the plastic casing conta-

ining the inlet hose in water.

If hoses are not long enough,

contact your local dealer.

Make sure the inlet and dra-

in hoses are kink-free and are

not crushed. Before using the

dishwasher for the rst time,

check the water inlet and drain

hose for leaks.

During use, the access to the

rear wall should be limited in

a sustainable manner such as

approaching the device to the

wall or furniture board.

When installing the dishwasher

make sure that the four feet are

stable and resting on the o-

or, adjusting them as required,

and check that the dishwasher

is perfectly leveled using a spi-

rit level.

If installing the dishwasher at

the end of a row of units ma-

king the side panel accessible,

the hing area must be covered

to prevent risk of crushing.

ELECTRICAL WARNINGS

Make sure the voltage speci-

ed on the rating plate corre-

sponds to that of your home.

For installation to comply with

current safety regulations, an

omnipolar switch with mini-

mum contact gap of 3mm is

required.

Regulation require that the

dishwasher is earthed.

For dishwasher with tted

plug, if the plug is not suitable

for you socket outlet, contact a

qualied technician.

Do not use extension leads,

multiple sockets or adapters.

Do not connect the dishwasher

to a socket which can be opera-

ted by remote control.

The power cable must be long

enough for connecting the

dishwasher, once tted in its

housing, to the main power

supply.

Do not pull the power supply

cable.

If the power cable is damaged

it must be replaced with an

identical one. The power ca-

ble must only be replaced by

a qualied technician in com-

pliance with the manufacturer

instruction and current safety

regulations.

Contact an authorized service

centre.

Do not operate this dishwa-

sher if it has a damaged mains

cord or plug, if it is not wor-

king properly, or if it has been

damaged or dropped. Do not

immerse the mains cord or

plug in water. Keep the cord

away from hot surfaces.

The electrical components

must not be accessible to the

user after installation.

Do not touch the dishwasher

with any wet part of the body

and do not operate it when

barefoot.

CORRECT USE

The water in the dishwasher is

not potable.

The maximum number of pla-

ce settings is shown in the pro-

duct sheet.

The door should not be left in

the open position since this co-

uld present a tripping hazard.

The open dishwasher door can

only support the weight of the

loaded rack when pulled out.

Do not rest objects on the door

or sit or stand on it.

Use only detergent and rinse

additives designed for an auto-

matic dishwasher.

Dishwasher detergents are

strongly alkaline. They can be

extremely dangerous if swal-

lowed. Avoid contact with the

skin and eyes and keep children

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool ADPU 502 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool ADPU 502

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info