Bedienungsanleitung Whirlpool AFB18412 (Seite 1 von 3) (Englisch)

756874

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

5. 3.

2.6. 1. Temperature Display

2. Freezer temperature - Fast freeze

3. Turning o the sound alarm

4. Black out alarm

5. Eco Night function

6. On/stand-by

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

TEMPERATURE DISPLAY

The display may alternately show the freezer compartment between

(-16°C and -24°C).

To avoid an increase of food waste, refer to recommended setting and

Storage Time in User manual online.

TURNING OFF THE SOUND ALARM

To turn o the sound alarm, briey press the

button.

FREEZER COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature with the “Freezer” button.

Recommended setting:

Freezer compartment: -18°C

FAST FREEZE

Press the “Freezer” button for 3 seconds 24 hours before

putting large quantities of food to freeze in the freezer compartment.

When the function is turned on the icon lights up .

The function turns o automatically after 48 hours, or manually by

pressing the “Freezer” button again for 3 seconds.

Note: avoid a direct contact between the fresh food and the food that is

already frozen. To optimise the freezing speed, drawers can be removed

and the food can be placed directly on the bottom of the compartment.

BLACK OUT ALARM

This alarm is triggered in the event of a prolonged power

outage that has caused the temperature inside the freezer

compartment to rise. The red indicator light ashes and an acoustic

signal is triggered, which will remain active until the door is closed.

The freezer compartment temperature indicators may ash. To turn

the sound signal o, press the “Turn o alarm” button . If the

freezer compartment has not yet reached the temperature for the

optimal preservation of the food items, the temperature alarm may be

triggered (see temperature alarm). Check the food before consuming it.

ECO NIGHT FUNCTION ECO NIGHT

Eco Night function allows one to concentrate the energy

consumption of the product during o-peak time (usually coinciding

with night time), when energy is available in large quantity and it costs

less than during the day (only in specic countries –using multiple-rate

system based on o-peak times- check your rate plan with your utility

company). To activate the function, press the button Eco Night at the

reduced rate start time (depending on the specic rates plan). For

example, if the reduced rate applies starting at 10:00 p.m., press the

button that corresponds to that time. When the LED is ON, the function

is active. After you activate the function, the product automatically

starts to adapt the energy consumption to the time (i.e. Consuming

more energy during the night then during the day).

Important: In order to work properly, the function must be enabled

both during the night and during the day. The function will remain

enabled until deactivated (it will also be deactivated in the event of a

blackout, or whenever the appliance is turned o). To deactivate the

function, press the button again. When the LED is OFF, the function is

not active.

Note: the power consumption of the appliance is declared with the Eco

night function disabled.

FREEZE CONTROL

”Freeze Control” is an advanced technology that reduces

temperature uctuations in the whole freezer compartment to

minimum, thanks to an innovative air system, totally independent from

the fridge. Freeze burns are reduced up to 50% and food preserves its

original quality and color. To activate/deactivate the “Freeze Control”

function press for 3 seconds the “Eco Night” button . The function

works properly in a dened range of temperature: between -22°C and

-24°C. When the function is engaged and the current temperature in

the freezer is set to the warmer set point than -22°C, the temperature is

automatically set to -22°C to match the working range. If the function

is engaged and the user modify the freezer temperature out of the

working range, the function is automatically switched o. In case of

“Fast freeze” is engaged, the function “Freeze control” is inhibited until

the “Fast Freeze” function switched o.

* Available only on certain models

Whirlpool AFB18412 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AFB18412

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info