Bedienungsanleitung Whirlpool AKM 208 (Seite 8 von 8) (Englisch)

71058

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

NATIONAL SAFETY REGULATIONS

ITALY

Ventilation of room

When the appliance is not equipped with safety

devices on the burners (thermocouples), the air

vents must be increased by 100%, and must be

at least 200 cm2, in compliance with the

departmental decree of 21 April 1993.

Gas supply system

Before connecting the appliance, make sure that

the gas supply system complies with standards

UNI 7129 and UNI 7131.

Connection to gas supply

The connection to the gas pipe network or gas

cylinder must be made with a rigid copper or

steel pipe with fittings complying with

standards UNI 7129, or with a continuous-

surface stainless steel hose complying with

standards UNI 9891. The maximum length of

thehoseis2m.

FRANCE

The installation and maintenance of the

appliance must be carried out by a qualified

skilled worker in accordance with the

regulations and trade rules in force, and in

particular:

-Order of 2 August 1977

Technical and Safety Rules applicable to fuel gas

and liquefied hydrocarbon installations located

within residential buildings and their

outbuildings.

Standard DTU P 45 – 204 – Gas installation

(formerly DTU no. 61-1 – Gas installations –

April 1982 + supplement no. 1 of July 1984)

-Departmental Health Regulations

For appliances connected to the electricity

network:

-Standard NF C 15-100 – Low-voltage electrical

installations – Rules.

U.K.

Provision for ventilation

The room containing this appliance should have

an air supply in accordance with the current

B.S. 5440: Part 2.

All rooms require a permanent vent in addition

to the openable window. If there are other fuel

burning appliances in the same room, B.S. 5440:

Part 2 should be consulted to determine the

requisite air vent requirements.

If the appliance is installed in a cellar or

basement, it is advisable to provide an air vent

of effective area 65 cm, irrespective of the

room volume.

Gas Safety Regulations

It is law that all gas appliances are installed by

competent persons in accordance with the

current gas safety regulations. Failure to install

appliances correctly could lead to prosecution.

It is in your own interest, and that of safety, to

ensure that the law is complied with.

The hob should be installed in accordance with

the Gas Safety (Installation and Use)

Regulations, the Building Regulations issued by

the Department of the Environment and the

Building Standards (Scotland) (Consolidation)

Regulations issued by the Scottish Development

Department. In the U.K. CORGI registered

installers work to safe standards of practice.

BELGIUM

The appliance is supplied with a 1/2” cone

threaded end to be connected to the gas

supply (according to ISO regulations 7/1 RP 1/2).

The connection must be effected in accordance

with Standard NBN D 51-003 with rigid piping or

in accordance with specifications sheet

A.R.G.B./03 with flexible tubing. The appliance

must be installed with an AGB-approved stop

valve.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKM 208 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKM 208

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info