Bedienungsanleitung Whirlpool AKP 542 IX (Seite 2 von 2) (Englisch)

450424

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

mportant: the programmer symbols are given as an indication

only; for correct operation of the programmer, follow the

instructions and illustrations given on these pages.

CONTROL BUTTONS AND SYMBOLS

1. Button used to select minute minder with acoustic signal

2. Button used to set the cooking duration

3. Button used to set the end-of-cooking time

4. Button used to select manual operation

5. Button used to set or change data

6. Button used to set or change data

AUTO:

when permanently alight, indicates operation of the

oven in automatic mode.

AUTO:

will also blink to confirm end-of-cooking, prompt

further programming or indicate a wrong selection.

indicates that the oven is in operation and enabled in

manual mode.

indicates operation of the minute minder.

SETTING THE CLOCK, AND SELECTING MANUAL OPERATION

When the appliance is installed new, or following a power

failure, digits

0:00

and the

AUTO

symbol will blink in the

display. All other functions remain inhibited.

Press and hold buttons

and

simultaneously, and set the

clock using buttons

and

To operate the oven manually, press button

: the symbol

will be displayed.

USING THE MINUTE MINDER WITH ACOUSTIC SIGNAL

This function is independent of oven operation

• Press button

: digits

0:00

are displayed

• Press button

to display the desired cooking time.

Having released the buttons, or a few seconds afterwards, the

actual time and the symbol are displayed.

The acoustic signal warns that the set time has elapsed.

Press button

to silence the acoustic signal.

PROGRAMMING THE COOKING TIME

Press button

: digits

0:00

are displayed; set the desired

cooking time with buttons

and

. After a few seconds, the

actual time is displayed with

AUTO

and the symbol both

permanently alight.

• Set the oven control knob to the temperature required:

the oven will come into operation immediately.

• Once the cooking time has elapsed, an acoustic

signal indicates that the oven has switched off.

Return the oven control knob to position

“0”

, then press

button

to silence the acoustic signal.

Note: the time remaining until end-of-cooking can be checked

or altered at any moment by pressing button

The end-of-cooking time can also be displayed by pressing button

USING THE PROGRAMMER

PROGRAMMING DURATION AND END OF COOKING TIME

• Press button

: digits

0:00

are displayed; set the

desired cooking time with buttons

and

. After a

few seconds, the actual time is displayed with

AUTO

and the symbol both permanently alight.

• Press button

to set the end of cooking time,

which is selected using buttons

and

. The

symbol will now go out, and reappear again when

the oven comes into operation automatically at the

start of the programmed duration.

• Set the oven control knobs to the temperature and

functions required.

• Once the cooking time has elapsed, an acoustic

signal indicates that the oven has switched off.

Return the oven control knob to position

“0”

, then press

button

to silence the acoustic signal.

USING THE PROGRAMMER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKP 542 IX Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKP 542 IX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info