Before using the machine, please also read the instructions for use carefully!
Quick Reference Guide
Indicator lamps and Options
Programme selector knob
The drying programme is selected by turning
The “Start (Pause)” indicator lamp flashes.
“Start (Pause)” button
The drying programme is started by pressing
The indicator lamp lights up.
The indicator lamp lights up when the filter
and/or heat exchanger including housing
needs to be cleaned.
Clean the filter at the end of every
The indicator lamp lights up when the water
container needs to be emptied.
The drying cycle is automatically interrupted.
Empty the container and restart the drying
Empty the water container after every
The drying programme is finished.
Please unload the dryer
Overdry protection / 6th Sense
The indicator lights up when a humidity
controlled programme is selected, to indicate
the activated protection function.
By selecting this option you can increase the
dryness level of the laundry.
Selecting this option will reduce the drying
This option cannot be selected when the
option “Rapid” is selected.
Delays the start of the drying cycle by 3, 6 or
Each time the button is pressed the delay is
increased by 3 hours.
Press the “Start (Pause)” button to confirm
the final selection and to start the dryer.
The lamps above the programme selector
knob are flashing to indicate the selected
During the countdown, the drum will turn from
time to time to redistribute the laundry and
the pump will start to pump water in the water
To cancel or change the previously set time
delay, set the index of the programme
selector knob to “off” position, or open the
5019 300 01367
(Subject to technical modifications)