564036
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5019 301 06484
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
•Turn the programme selector to the desired programme and
temperature. The display shows the programme duration and
the predefined spin speed. The lamp next to the “Start/
Pause” button blinks.
Push the button of any option desired - the respective indication lights up.
If the combination of programme and option is not possible, the
indication lights switch off automatically. Unsuitable combinations
of options are deselected automatically.
“Prewash” button
Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
Do not use liquid detergent for the main wash when selecting
“Prewash”.
“Rapid” button
Enables quicker washing by shortening the programme duration.
Recommendable for small loads or only lightly soiled laundry.
“Clean +” button
Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
Use with maximum load.
Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
May prolong the programme by up to 15 minutes.
Appropriate for use of stain removers and bleaches on oxygen
basis. Chlorine or perborate bleaches must not be used!
“Cold wash” button
Water is heated only up to 20°C.
Suitable for delicate laundry items with wash temperature
recommendation of max. 30° on the care label.
Mainly selectable on the lowest temperature step of the
programmes only.
“Intensive rinse” button
More water is added and rinse cycle is prolonged.
This option is particularly suitable for areas with very soft
water, washing baby linen and helping people with allergies.
“Easy ironing” button
Reduces creasing by an increased water quantity and a very
gentle spin.
“Rinse hold” button
The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and prevent
colours from changing.
CONSUMPTION DATA
Programme Te m p e r a t u r e
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approximate programme duration
(hrs.min)
without “Rapid” with “Rapid”
Cotton 95 6.0 59*** 1.90 2:00
Cotton* 60 6.0 49 0.78 4:00 2:30
Cotton* 60 3.0 37 0.70 2:30
Cotton 40 6.0 60 0.70 2:45 1:45
Cotton* 40 3.0 37 0.60 2:30
Jeans 40 5.0 76 0.70 3:00 2:00
Synthetics 60 3.0 50*** 0.80 1:35 1:14
Synthetics 40 3.0 46 0.50 1:20 0:59
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Wool 20 1.0 60 <0.10 0:40
Handwash 40 1.0 45 0.50
0:40
Lingerie 30 1.0 45 0.40
0:36
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* Reference programmes for Energy Label.
** Automatic adaption of programme duration after detection of wash load.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
**
**
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
Particularly useful if you want to postpone spinning to a later
time, or if you want to drain only.
Note: The programme stops to “Rinse hold” at the time the
“Rinse hold” light in the programme sequence indication is on. The
indication lamp next to the “Start/Pause” button blinks.
Terminate the “Rinse hold” option :
Press the “Start/Pause” button ; the programme will terminate
automatically with the final spin cycle for the present wash programme.
If you do not wish to spin the clothes, turn the programme
selector to the “Drain” programme and press the “Start/
Pause” button .
“Spin” button
Every programme has a predefined spin speed; press the
button if you want to set a different spin speed.
If spin speed “0” is selected, the final spinning is cancelled and
the water is drained out only. However, intermediate spin
peaks remain during rinse.
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating “Start delay”.
Select programme, temperature and options.
Press the “Start delay” button to select the desired delay time
between 30 minutes and 23 hours.
Press the “Start/Pause” button .
On the display, the start delay symbol and the dot between hours
and minutes blink. The countdown of the delay time begins.
•The delay time indication disappears when the programme
starts and it is replaced by the remaining programme duration.
Once having pressed the “Start/Pause” button , the delay
time can be reduced by pressing again the “Start delay” button.
To cancel the “Start delay
Turn the programme selector to another position, or press the
“Start/Pause” button - the selected start delay
disappears from the display. Press “Start/Pause” again if
you want to start the selected programme immediately.
Open the tap and press the “Start/Pause” button . The
indication lamp next to the “Start/Pause” button lights up.
The programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Drain/Spin.
Before starting and after end of a programme, the lamp lights to show
that the door can be opened. As long as a wash programme is running,
the door remains locked and must on no account be forced open. In
case you have an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused by a fault in an
electrical component.
“Water tap closed”
The washing machine has no or insufficient water supply; the water
tap might be closed or the water inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may be kinked or
the filter must be cleaned (see “Cleaning the filter” in your
Instructions for Use).
All the lights of the programme sequence indicator are off
and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme and, if you want, another spin
speed and any options.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
The “Reset” button cancels a programme before the end.
•Press and hold the “Reset” button for a few seconds.
Any existing water is drained out. It may last some time until
the door can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
FAILURE INDICATIONS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL A RUNNING PROGRAMME
BEFORE THE END
30106484GB.fm Page 2 Friday, May 13, 2011 5:24 PM
Black process 45,0° 150,0 LPI
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Whirlpool AWO 5476 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Whirlpool AWO 5476

Whirlpool AWO 5476 Kurzanleitung - Deutsch - 2 seiten

Whirlpool AWO 5476 Bedienungsanleitung - Deutsch - 11 seiten

Whirlpool AWO 5476 Bedienungsanleitung - Englisch - 12 seiten

Whirlpool AWO 5476 Kurzanleitung - Holländisch - 2 seiten

Whirlpool AWO 5476 Bedienungsanleitung - Holländisch - 11 seiten

Whirlpool AWO 5476 Kurzanleitung - Französisch - 2 seiten

Whirlpool AWO 5476 Bedienungsanleitung - Französisch - 11 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info