DESCRIPTION OF THE DRYER
To open the door: pull the handle
To close the door: push gently until closed.
On delivery from the factory, the outlet vent hose, together with an
adaptor, is located in the drum.
If the vent hose is not supplied, the AMH 577 kit, available from
your dealer, should be used.
Installing the vent hose
Place a towel or the packing material on the right-hand side next
to the dryer.
Place the dryer on its right-hand side (seen from the front) on the
towel or the packing material.
Push the adapter into the hose (see illustration). Attach the
adapter with the vent hose to the connection in the dryer base
and lock it into place.
Without kinking it, lead the vent hose outside (inside diameter
10 cm, maximum length with two bends 3 m).
Ensure that the vent hose does not sag when stacking the dryer on a
washing machine. It should only be placed horizontally or upwards.
Do not connect to ventilation systems protected by fly nets. These can
become clogged and cause malfunctioning of the dryer.
Do not connect the vent hose to a chimney system.
Do not connect the vent hose to the heating system. Only connect
the hose to ventilation systems insulated against humidity.
Dryer operation without vent hose
Only use the dryer in a large, well-ventilated room.
Keep the room free of dust.
A minimum distance of 10 cm between rear of appliance and the wall
must be observed.
18190-gb.fm5 Page 7 Monday, November 12, 2001 10:41 AM