Bedienungsanleitung Whirlpool FSCR12441 (Seite 11 von 12) (Englisch)

650492

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

To cancel the delay

• either press Start/Pause to cancel the delay; to start the selected

programme immediately, press Start/Pause again

• or press and hold On/O to cancel the complete programme

setting.

Key lock

To lock the buttons and keys of the control panel against

unwanted operation.

To lock:

• The washing machine must be switched on.

• Press and hold the option button until the display

indicates that the keys are locked. The buttons and keys

are locked now; only On/O works.

If you switch the washing machine o and on again, the key

lock remains active until you unlock it.

To unlock: press and hold the option button again for at least 3

seconds, until the display indicates that the keys are unlocked.

INDICATORS

Door can be opened

Energy / Water monitor

Gives feedback about the energy and water

consumption of your programme setting.

The less indicators light up, the more economic

is your programme setting. Can still adapt after

sensing phase of laundry load.

Failure: Observe the display message.

For any failures , refer to section Troubleshooting in the

“Use and Care Guide”.

Descaling

A display message will remind you regularly to descale the washing

machine. Find descaler appropriate for the washing machine on

www.whirlpool.eu.

To cancel the display reminder, press the OK key.

Connection status

If your washing machine has been already connected to

the Internet (see 6th Sense Live Remote Control / Setup

Procedure section in the Use and Care Guide) this indicator

provides a feedback about the status of the Internet connection

through your WiFi router.

When you switch on the washing machine, the connection status

indicator blinks: the washing machine is looking for a connection.

When it becomes solidly lit, it means that the appliance is properly

connected to the Internet.

The strength of the wireless signal is shown by the indicator (when

all the elements of the indicator are lit, the signal strength is strong).

6th Sense Live Remote Control

The 6th Sense Live feature allows to remotely monitor and

control your washing machine using a smartphone or a

tablet. To use this feature you have to successfully connect

the machine to your home wireless network and to the Internet by

following the set-up procedure described in the Use and Care Guide

(6th Sense Live Feature / Setup Procedure section).

You can monitor the status of your washing machine at any time

using the 6th Sense Live app. If you want to control the appliance

remotely (for example: to set and start a programme), the Remote

Control has to be enabled.

To enable Remote Control:

• Make sure the router is on and connected to the Internet.

• Switch on the washing machine.

• Load your laundry, close the door, add the detergent and

make sure the water tap is open.

• Make sure the Connection Status indicator is solidly lit.

• Press the Remote Control button, the door locks and the

buttons and keys on the control panel are disabled. The

only controls still active are “Remote Control”, “ON/OFF”

and “Key Lock”.

• The washing machine is now in Remote Control mode and is

ready to be controlled via 6th Sense Live app.

• If you start a programme remotely, at the end of the programme

the washing machine will automatically exit the Remote Control

mode and will switch o.

To manually exit Remote Control:

• With the machine in Remote Control, press again the Remote

Control button. You will regain local control over the control panel

of the washing machine.

Rinse hold (selectable with Spin button)

Avoids automatic spinning of the laundry at the end of the

programme. The laundry remains in the last rinse water, the

display indicates the rinse hold and the programme does not

continue.

Suitable for delicate laundry which is not appropriate for spinning,

or which should be spun with a low spin speed. Not suitable for silk.

To select “Rinse hold”:

• Press the spin button; select Rinse hold. The Rinse hold symbol on

the display lights up.

The display indicates when the programme has reached the Rinse

hold. Choose to:

• drain the water, no spin:

press the Spin button, or the UP or DOWN key, to select

spin speed “0”. Or select programme Drain. Afterwards

press Start/Pause: the water will be drained and the

programme ended.

• spin the laundry:

the default spin speed blinks - start the spin cycle by

pressing Start/Pause. Or select a dierent spin speed by

pressing the Spin button and the UP or DOWN key, and

press Start/Pause.

Finish in

Enables to have the laundry ready at a particular time by

setting a delay until end of the programme.

Choose a delay up to 23:30 hours. Only if you add detergent

manually: use powder - and not liquid - detergent with this function

to ll the detergent compartment for manual dosing.

Select programme, temperature and options.

• Press the “Finish in” button – the button lights up.

• Press UP or DOWN key to select a delay up to 23:30 hours.

• Press “Start / Pause” - the countdown of the delay starts. The

display indicates the Finish in period (= time until end of

programme), as well as the default programme duration.

• The programme starts automatically, in time to be nished at the

end of the delay period. On programme start, the delay on the

display is replaced by the current programme status.

Whirlpool FSCR12441 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR12441

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info