Bedienungsanleitung Whirlpool FSCR80410 (Seite 3 von 8) (Englisch)

650494

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

DAILY USE

See the Use and Care Guide for more details on functions /

see the last page for information on how to obtain the Use

and Care Guide

1. LOAD LAUNDRY

• Prepare your laundry according to the

recommendations in the “HINTS AND TIPS”

section.

Make sure that pockets are empty, fasteners

closed and ribbons tied together.

• Open the door and load the laundry. Observe the

maximum load sizes given in the separate programme

chart.

2. CLOSE THE DOOR

• Make sure that no laundry gets stuck

between door glass and the rubber

seal.

• Close the door so that you can hear it click shut.

3. OPEN THE WATER TAP

4. SWITCH ON THE WASHING MACHINE

• Press the “On/O” button until the programme

button lights up. An animation appears on the

control panel and the appliance plays a sound.

The washing machine is then ready for

operation.

5. SET THE DESIRED PROGRAMME

GUIDED MODE  the button light will guide you

through setting your programme in the following order:

Selection of programme/temperature/spin speed/

options. As soon as you conﬁrm a selection by pressing

the knob, the button light jumps to the next step.

• Select programme:

Make sure that the programme button lights up.

Turn the knob to select the desired programme.

The indicator next to the selected programme lights up.

Conﬁrm the desired programme by pressing the knob.

• Change temperature, if required

If you want to change the temperature indicated

on the display, make sure that the Temperature

button lights up.

Turn the knob to select the desired temperature, then

press the knob to conﬁrm.

• Change spin speed, if required

If you want to change the spin speed indicated

on the display, make sure that the Spin button

lights up.

Turn the knob to select the desired spin speed, or Rinse

hold, then press the knob to conﬁrm.

Refer to OPTIONS, FUNCTIONS AND INDICATORS for

more information.

• Select options, if required

If you want to select additional options, make sure

that the Options button lights up. The options

which are selectable for your programme are indicated

by the arrows which are lit up

Turn the knob to select the desired options. The symbol

for the selected option will ﬂash. Press the knob to

conﬁrm.

Some options/functions can be selected by pressing the

button directly:

Refer to the OPTIONS, FUNCTIONS AND INDICATORS

section for more information.

INDIVIDUAL MODE

After you have switched on the washing machine, you

are not forced to follow the GUIDED MODE.

The order in which you choose to set your programme is

up to you.

To make a setting, ﬁrst press the relevant button, then

turn the knob to select, and ﬁnally press the knob to

conﬁrm.

The range of temperatures, spin speeds and options

depend on the programme selected. It is therefore

recommended that you start by selecting the

programme.

6. ADD DETERGENT

• If you are not using the Dosing Aid function, pull

out the detergent dispenser and add detergent

(and additives/softener) now; observe the dosing

recommendations on the detergent pack.

If you have selected PREWASH or START DELAY,

observe the recommendations in the OPTIONS,

FUNCTIONS AND INDICATORS section. Then carefully

close the detergent dispenser.

• If you are using the “Dosing Aid” function, add

detergent later, after you have started the

programme. Refer to the OPTIONS, FUNCTIONS AND

INDICATORS section for more information.

• After having added detergent/additives, do not open

the detergent dispenser to avoid any overﬂow.

7. START PROGRAMME

• Press and hold “Start/Pause” until the button

lights up and stays on; the programme will start.

• If you have selected “Dosing Aid”, the washing

machine indicates the recommended detergent

amount for your laundry load after the programme

starts.

Follow the instructions as indicated in the OPTIONS,

FUNCTIONS AND INDICATORS/Dosing Aid section.

8. CHANGE THE SETTINGS OF A PROGRAMME

WHICH IS RUNNING, IF REQUIRED

You can still change the settings while a programme is

running.

The changes will be applied, provided the respective

programme phase has not yet ﬁnished.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool FSCR80410 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool FSCR80410

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info