Bedienungsanleitung Whirlpool TDLRBX6252BS BE (Seite 2 von 4) (Englisch)

793710

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels of

the laundry. The value given in the tub symbol is the maximum

temperature possible for washing the garment.

Rapid 30’

For washing lightly soiled garments quickly. This cycle lasts only 30 minutes,

saving time and energy.

Eco 40-60

For washing normally soiled cotton garments declared to be washable at 40

°C or 60 °C, together in the same cycle. This is the standard cotton programme

and the most efficient in terms of water and energy consumption.

Aqua saver

Lightly soiled laundry made of synthetic fifibres, or synthetics mixed with

cotton garments. Saving programme with a very low water consumption. Use

liquid detergent and the lowest recommended amount for 2.5kg laundry. Do

not use softener.

Colours

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use

heavy duty detergent, if necessary also stain removers or bleaches on oxygen

basis. Do not use liquid detergent.

Jeans

Turn garments inside-out before washing and use a liquid detergent.

Hygiene

This program removes 99 % of bacteria while washing normally to heavily

soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

and linen.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Rinse & Spin

Separate rinse and intensive spin programme. For robust

laundry.

Spin

Spins the load then empties the water. For robust laundry.

Wool

All wool garments can be washed using programme ‚ “Wool“ even those

carrying the “hand-wash only“ label. For best results, use special detergents

and do not exceed max kg declaration of laundry.

Delicates

For washing particularly delicate garments. Preferably turn garments inside

out before washing.

Synthetics

For washing soiled garments made from synthetic fibres (such as polyester,

polyacrylic, viscose, etc.) or cotton/synthetic blends.

Cotton

Normally to heavily soiled and robust cottons .

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic fibres and mixed fibres.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton“ programme at

a temperature of 95°C. Pour a small quantity of detergent powder into the

main wash compartment of the detergent dispenser (maximum 1/3 of the

quantity the detergent manufacturer recommends for lightly soiled laundry).

Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS“ section. Load the laundry, close the drum door and check that

it is closed properly. Pour in the detergent and any additives. Observe the

dosing recommendations on the detergent pack. Close the lid. Turn the

programme selector to the desired programme and select any option if

needed. The display shows the duration of the selected programme (in hours

and minutes), and the indicator for the “Start/Pause“ button flashes. The

temperature and spin speed can be changed by pressing the “Temperature“

button or the “Spin“ button. Open the tap and press the “Start/Pause“

button to start the wash cycle. The “Start/Pause“ indicator will lights up

and the door will be locked. Due to variations in load and temperature of inlet

water, the remaining time is newly calculated in certain programme phases. If

this is the case, an

animation appears on the time display.

PAUSE OR CHANGE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause“ button, the indicator light

blinks. Select any new programme, temperature, options or spin speed if you

wish to change those settings. Press the “Start/Pause“ button again to

start the wash cycle from the point at which it was interrupted. Do not add

detergent for this programme.

DOOR OPEN INDICATOR

Before starting and after the end of a programme, the “Door open“

indicator lights to show that the lid can be opened. As long as a wash

programme is running, the lid remains locked and must on no account be

forced open. In case you have an urgent need to open it during a running

programme, for example to add more laundry, or to remove laundry

which was loaded by mistake, press the “Start/Pause“ button. If the

temperature is not too high, the “Door open“ indicator light turns on.

It may last a while until you can open the lid. Press “Start/Pause“ to

proceed with the programme again.

PROGRAMME END

The “Door open“ indicator lights up and the display shows . Turn the

programme selector to the “O“ position and close the water tap. Open the

lid and drum and unload the machine. Leave the Lid open for some time to

allow the interior of the machine to dry. After about a quarter of an hour,

the washing machine will switch off completely to save energy.

To cancel a running programme before the end of cycle, press the

“Reset/Drain“ button for at least 3 seconds. The water is drained out. It

may last a while until you can open the lid.

OPTIONS

! When the combination of programme and additional option(s) is not

possible, the indication lights switch o automatically.

! Unsuitable combinations of options are deselected automatically.

Colours 15°

Saves energy used for water heating while maintaining a good wash

result. Supports colour maintenance when washing coloured laundry.

Recommendable for lightly soiled laundry without stains. Make sure that your

detergent is suitable for cold wash temperatures.

FreshCare

Select this option if you cannot unload the laundry soon after programme

end, or if you tend to forget the laundry in your washing machine. It will

help to keep your laundry fresh. The washing machine will start to tumble

the laundry periodically after programme end. The light of the “Fresh care“

button will blink while this function is active, and the display will show an

animation. The periodic tumbling will last up to approximately 6 hours after

the end of your wash programme, and you can stop it at any time by pressing

the “Fresh care“ button. It will last a while until you can open the door. After

the “Fresh care“ period has run out, the display indicates .

Temperature

Every programme has a predefined temperature. If you want to change the

temperature, press the “Temperature“ button. The value appears on the

display.

Start delay

To set the selected programme to start at a later time, press the “Start delay“

button to set the desired delay time. The lamp for the

“Start delay“ option button lights up, and it goes off when the programme

starts. Once having pressed the “Start/Pause“ button, the countdown

of the time delay begins. Number of hours pre-selected can be reduced by

pressing the “Start delay“ button again. Do not use liquid detergent

when activating this option. To cancel the “Start delay“ turn the

programme selector to another position.

Rapid

Enables quicker washing by shortening the programme duration.

Recommendable for small loads or only lightly soiled laundry.

Prewash

Only for heavily soiled loads (for example sand, granular dirt). Increases the

cycle time by approximately 15 min. Do not use liquid detergent for the main

wash when activating the Prewash option.

Intensive rinse

Helps to avoid detergent residues in the laundry by extending the rinse

phase. Particularly suitable for washing baby laundry, for people suffering

from allergies and for areas with soft water.

Spin

Every programme has a predefined spin speed. If you want to change the

spin speed, press the “Spin“ button. If spin speed “0“ is selected, the final

spinning is cancelled but intermediate spin peaks remain during the rinse.

The water is drained out only.

Whirlpool TDLRBX6252BS BE Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool TDLRBX6252BS BE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info