Bedienungsanleitung Whirlpool W7ME450 (Seite 10 von 10) (Englisch)

756895

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

CLEANING AND MAINTENANCE

Make sure that the oven has cooled down before

carrying out any maintenance or cleaning.

Do not use steam cleaners.

Wear protective gloves.

Do not use wire wool, abrasive scourers or

abrasive/corrosive cleaning agents, as these could

damage the surfaces of the appliance.

The oven must be disconnected from the mains

before carrying out any kind of maintenance work.

EXTERIOR SURFACES

•Clean the surfaces with a damp microfibre cloth.

If they are very dirty, add a few drops of pH-neutral

detergent. Finish off with a dry cloth.

•Do not use corrosive or abrasive detergents. If

any of these products inadvertently comes into

contact with the surfaces of the appliance, clean

immediately with a damp microfibre cloth.

INTERIOR SURFACES

•After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove

any deposits or stains caused by food residues To

dry any condensation that has formed as a result

of cooking foods with a high water content, let the

oven to cool completely and then wipe it with a

cloth or sponge.

•Activate the “Smart Clean” function for optimum

cleaning of the internal surfaces.

•Clean the glass in the door with a suitable liquid

detergent.

ACCESSORIES

Soak the accessories in a washing-up liquid

solution after use, handling them with oven gloves

if they are still hot. Food residues can be removed

using a washing-up brush or a sponge.

TROUBLESHOOTING

Problem Possible cause Solution

The oven is not working.

Power cut.

Disconnection from the mains.

Check for the presence of mains electrical power and

whether the oven is connected to the electricity supply.

Turn off the oven and restart it to see if the fault persists.

The oven makes noises, even

when it is switched off. Cooling fan active. Open the door or hold or wait until the cooling process

has finished.

The display shows the letter

“F” followed by a number. Software fault. Contact you nearest Client After-sales Service Centre

and state the number following the letter “F”.

The oven does not heat up.

When “DEMO” is “On” all commands are active and

menus available but the oven doesn’t heat up.

DEMO appears on display every 60 seconds.

Access “DEMO” from “SETTINGS” and select “Off”.

PRODUCT FICHE

WWW The product fiche with energy data of this

appliance can be downloaded from Whirlpool

website docs . whirlpool . eu

HOW TO OBTAIN THE USE AND CARE GUIDE

>WWW Download the Use and Care Guide

from our website docs . whirlpool . eu (you

can use this QR Code), specifying the

product’s commercial code.

> Alternatively, contact our Client After-sales Service.

CONTACTING OUR AFTER-SALES SERVICE

You can find our contact details

in the warranty manual. When

contacting our Client After-sales

Service, please state the codes

provided on your product's

identification plate.

XXX/XXX

XXXXXXXXXXXX

400011197193

Printed in Italy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool W7ME450 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool W7ME450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info