Bedienungsanleitung Whirlpool WCIO3T321 (Seite 4 von 8) (Englisch)

702718

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

DELAY

The start time of the program may be delayed for a period

of time between 1 and 12 hours.

1. Press the DELAY button: the corresponding symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2. Select the wash program and close the door: the timer

will begin counting down;

3. Once this time has elapsed, the indicator light switches

o and the wash cycle begins.

To adjust the delay time and select a shorter period of

time, press the DELAY button. To cancel it, press the

button repeatedly until the selected delayed start

indicator light switches o.

The wash program will start automatically as soon as the

door is shut.

The Delay function cannot be set once a wash cycle

has been started.

MULTIZONE

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and

detergent.

Select the program and then press the MULTIZONE

button: the symbol of the chosen rack will appear on

the display. By default the appliance washes dishes in

all racks.

To wash only the specic rack, press this button

repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance

will wash dishes in all racks).

Remember to load the upper or lower rack only, and

to reduce the amount of detergent accordingly.

TURBO

This option can be used to reduce the duration of the

main programs while maintaining the same washing

and drying performance levels.

After selecting the program, press the TURBO button

and the indicator light will switch on. To deselect the

option, press the same button again.

POWER CLEAN®

Thanks to the additional power jets this option provides

a more intensive and powerful wash in the lower rack, in

the specic area. This option is recommended for

washing pots and casseroles. Press this button to activate

POWER CLEAN® (the indicator lights up).

TABLET

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET button (the indicator light will switch

on) if you use combined detergents in tablet form

(rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option

should be o.

OPERATION INDICATOR

A LED light projected on the oor indicates that the

dishwasher is working. One of the following operating

modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few

seconds, stays o during the cycle and ashes at the

end of the cycle.

c) The light stays on during the cycle and ashes at

the end of the cycle (default mode).

If the delayed start was set, the light goes on either for the

rst few seconds or the entire duration of the countdown,

based on whether mode b) or c) was set.

The light goes o every time the door is opened. To select

the mode you prefer, switch on the machine, hold down

button P until one of the three letters appears on the

display, press button P until you reach the desired letter

(or mode), hold down button P to conrm the selection.

Note: If NaturalDry is active and it opens the door,

then OPERATION INDICATOR will not ash at the

end of cycle.

NaturalDry

NaturalDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying per-

formance every day. Door opens at the temperature that is safe to your

kitchen furniture, thus door will not be opened when the option of

SANI RINSE, POWER CLEAN® or TURBO are on.

As additional steam protection, special designed protection foil is ad-

ded together with the dishwasher. To see how to mount protection foil

please refer to (INSTALLATION GUIDE).

NaturalDry functionality could be disabled by the user as follows:

1. Go to the Dishwasher software menu pressing and holding P button

(6 sec).

2. You are currently in Light Control Menu (please refer to OPERATION

INDICATOR description), if you don’t want to change anything please

press and hold Pbutton (3 sec).

3. You switched to NaturalDry Control Menu, you could change

status of NaturalDry functionality by pressing P button:

E – enabled d – disabled

To conrm the change and exit from the Control Menu please press

and hold P button (3 sec).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WCIO3T321 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WCIO3T321

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info