Bedienungsanleitung Whirlpool WIO 3T123 PEF (Seite 6 von 8) (Englisch)

641605

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

LOADING THE RACKS

CUTLERY RACK

The third rack was designed to

house the cutlery.

Arrange the cutlery as shown

in the figure.

A separate arrangement of the

cutlery makes collection easier

after washing and improves

washing and drying

performance.

Knives and other utensils with sharp edges must be positioned

with the blades facing downwards.

The geometry of the rack

makes it possible to place such

small items as coffee cups in

the area in the middle.

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space upwards and avoid

collision with the items loaded into lower rack.

The upper rack is equipped with a

Upper Rack height adjuster

(see figure), without pressing the levers,

lift it up by simply holding the rack sides,

as soon as the rack is stable in its upper

position.

To restore to the lower position, press

the levers A at the sides of the rack and

move the basket downwards.

We strongly recommend that you do

not adjust the height of the rack when it is loaded.

NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be positioned at

three different heights to optimize the

arrangement of crockery inside the rack.

Wine glasses can be placed safely in the

foldable flaps by inserting the stem of each

glass into the corresponding slots.

For optimum drying results incline the

foldable flaps more. To change the

inclination, pull up the foldable flap, slide it

slightly and position it as you wish.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should

ideally be placed at the sides to avoid interferences with the spray arm.

(loading example for the lower rack)

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower) to

load pans and salad bowls easily.

POWER CLEAN IN LOWER RACK

Power Clean® uses the special water

jets in the rear of cavity to wash more

intensively the high dirty items.

Placing the pots/casseroles faced to

the Power Clean® component please

activate the POWER CLEAN on the

panel.

The lower rack has a Space Zone, a special pull-out support in the rear of

the rack that can be used to support frying pans or baking pans in upright

position, thus taking up less space.

How to use Power Clean®:

1. Adjust the Power Clean® area (G)

folding down the rear plate

holders to load pots.

2. Load pots and casseroles inclined

vertically in Power Clean® area.

Pots have to be inclined towards

the power water jets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool WIO 3T123 PEF Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool WIO 3T123 PEF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info