The appliance is normally factory set for optimum
operation at a temperature of +12°C.
To adjust the internal temperature between +8°C
and +16°C, proceed as follows:
• Press button C once to adjust the internal
temperature: the digital display will blink,
showing the temperature previously set.
• Each time the button is pressed, the
temperature setting is changed by 1°C: the value
(between +8°C and +16°C) blinks cyclically on
the display.
• Approximately 5 seconds after the button has
been pressed for the last time, the set
temperature is stored and the digital display
stops blinking.
Note: In the event of a power failure, selected
functions remain stored in the memory.
ADJUSTING THE REFRIGERATOR
TEMPERATURE
When the bulb is faulty or broken, request a
replacement from our authorised personnel
(After-Sales Service).
REPLACING THE BULB (models with glass door)
Always disconnect the appliance from the
power supply before replacing the bulb.
1. Loosen the screw and remove the lamp cover.
2. When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but
pull towards the inside of the appliance
(as indicated by the arrow).
3. Refit the lamp cover and secure it with the
screw.
REPLACING THE BULB (models with glass door)
5019 611 01008
Printed in Italy 04/09
ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD
