Bedienungsanleitung Whynter ARC-12D Sno (Seite 4 von 8) (Englisch)

643505

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Installation

Operation

Setting The Fan Speed

Press the SPEED button to choose the fan speed you require, high or low. The indicator of high

or low fan will light up at the same time.

If the unit is in AUTO mode, it will select the fan speed automatically according to the

ambient temperature (the related indicators, cool, fan or heat will light up), at this time the

fan speed switch is invalid.

Setting the Timer

Press the TIMER button to set the operating hours you desire (1 to 12 hours, the timer

indicator will light up). When the set time has elapsed, the machine will turn off

automatically. The display window will show the hour(s) you set as you press the TIMER button.

If the timer button is not pressed, the unit will work continuously.

By pressing the timer button but without turning on the unit, you can PRE-SET the time for

the machine to work. For example, if you press the timer to ‘2’, the unit will come on

automatically after 2 hours.

All the above functions can also be performed with the supplied remote

control. This remote control requires 2 AAA batteries to operate.

Regulating the airflow direction

IMPORTANT!

• The compressor will start approximately 3 minutes after the unit is turned on (this will 

help prolong the life of the compressor). After switching the unit off, please wait at least

3 minutes before turning the unit back on.

• The cooling system will switch off if the room temperature is lower than set. The fan, however, keeps 

working at the set level. If the ambient temperature rises above the chosen temperature +/

5°F, 

the cooling will resume.

• In heating mode, the compressor will switch off if the room temperature is HIGHER than the one set 

(the fan keeps working at the set level). When the room temperature drops 5°F below the chosen 

temperature, heating will resume.

• This machine is equipped with an ANTI-FROST function. Sometimes, while using the heating function 

during low temperatures, the heating will stop for a while to melt the internal frost. When this occurs, 

wait for heating to resume.

• As you switch on the heating, the fan will stop for 15-20 seconds prior to the unit starting.

Wall Connection

1.Make a hole (5.1" in diameter)

in the wall.

2.Insert the Round Connector

(part #14) into the hole and

hold in place by using 4 small

screws (not supplied).

3.Extend one end of the exhaust

pipe (part #11) and screw into

the Round Connector by

turning clockwise.

4.Extend other end of exhaust

pipe and screw in Adaptor (part

#10) by turning clockwise.

5.Push Adaptor to fit firmly

over the opening on the back

of the unit.

** When not in use, cover the

Round Connector and hole

with Cap (part #15).

2. Attach Slide Bar Connector,

(Round Connector) to the

other end of the Hose by

extending hose at least 6".

Then tighten Hose by turing

the (Round Connector)

clockwise.

Window Kit Installation

In order for this unit to function

properly, it must be vented to the

outside.

Fitting the Exhaust Hose through

the window is easy. Please see

below.

1. Extend Hose at least 6" and

insert it into back of the unit,

tightening into place by turning

it clockwise.

3. Place Adjustable Slide Bar in

the wondow and expand so it

fits tightly.

4. Lower the windwo.

5. Make sure the Hose has no

kinks.

Slide Bar has 3 sections which

allows installation in windows up

to 48" in width.

Turn the roller on the air vent to control

the airflow direction from the vertical louvres.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whynter ARC-12D Sno Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info