643502
15
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
15
CARE AND MAINTENANCE
IMPORTANT:
Switch off the air conditioner and disconnect the plug
from the power outlet
Drain water by removing the drain plug
Always transport the air conditioner in an upright posi-
tion only
CLEANING THE AIR FILTERS
To ensure the air intake is filtered properly and to as-
sure that your air conditioner runs efficiently, it is rec-
ommended to clean the air filters at least once every
two weeks
This unit has three air filters; the Silvershield pre-filter,
3M filter and the lower air filter
Switch off the air conditioner and the Silvershield pre-
filter and 3M filter from the unit (Fig. 7a and Fig. 7b)
Remove the lower filter by loosening the screw and
taking down the air inlet grille. (Fig. 7a)
Use a vacuum cleaner or tap lightly to remove loose
dust and dirt from the filters. Then rinse them thorough-
ly under warm or cold running water (no hotter than
100F.)
Dry thoroughly before re-inserting the filters. (Fig. 7c)
WARNING! Never operate the air conditioner without
the filter in place
CLEANING THE AIR CONDITIONER
Always switch off the air conditioner and disconnect the
plug from the power supply outlet before cleaning the
air conditioner
Use a soft damp cloth to wipe the body of the unit.
Never use harsh chemicals, oil-based products, deter-
gents, chemically treated cloths or other cleaning solu-
tions. These could possibly damage the body of the air
conditioner
END OF SEASON STORAGE
Switch off the air conditioner and disconnect the power
plug from the power supply outlet before cleaning the
air conditioner
Clean the air filters
Drain the condensed water completely
On a warm day, turn on the Fan only mode for half a
day so that the inside can dry out completely
Wrapped the power cord and bundle it with the tape
(Fig.29)
Remove the batteries from the remote controller
Wrap the cord using the Power Cord Buckle and insert
the plug into the Power Plug Socket. (Fig. 7d)
It is recommended that the air conditioner be put back
into its original carton for storage
The Silvershield pre-
filter can be removed
for cleaning by pull-
ing the filter frame
back and out
Remove the screw,
then remove the lower
air filter
Install the Silvershield
pre-filter and filter frame
back to its place
Re-install lower air
filter and screw
Fig. 7a
Fig. 7b
Fig. 7c
Fig. 7d
Power Cord
Buckle
Power Plug
Socket
3M Filter
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Whynter ARC-148MS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info