774438
21
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
P. 6 7P.P. 6 77P.
Overheating safety mechanism
The safety mechanism will cut off the power as soon as the heating element
becomes too hot. This is to avoid problems with overheating.
If this should happen:
- Pull the plug out of the mains socket.
- Leave the fan heater to cool for ten minutes.
- Ensure that the heater is positioned in accordance with instructions.
- Check that no dust or other obstacles are blocking the flow of air.
- Clean the grille with a hoover if necessary.
Cleaning
- Turn the switch to "0". Allow the fan heater to cool down.
- Pull the plug out of the mains socket.
- Clean the outside of the fan heater with a damp cloth.
- Never allow water to drip into the fan heater.
- Do not immerse the fan heater in water.
- Clean the air openings regularly with a hoover as required.
Installing the fan heater
Position the fan heater so that incoming and outgoing air is not hindered in any
way. Choose a safe place to avoid the risk of fire
(see also the section entitled "IMPORTANT"). See also the installation instructions
for the specific unit later in this user manual.
IMPORTANT ADDENDUM TO USER MANUAL
(FOR FILTER + FILTER HOLDER)
NB: The filter that comes with the appliance should be used to prevent dust from
collecting on the heater's heating element.
The filter should be cleaned regularly (we suggest checking it once a month):
clean the filter using a hoover; alternatively, the filter can be washed in a
dishwasher on the lowest temperature setting.
Maintenance of the filter is extremely important. If the filter is not cleaned
regularly, dust may affect the flow of air and cause the temperature switch inside
the product to switch off when the unit is operating normally.
Topple switch for FH-1 model
This product features an additional safety device for your protection.
The fan heater will disconnect automatically if the appliance leans more
than 30° forward or backward.
The appliance will switch on again automatically when it is returned to an upright position.
Starting the appliance
You have the choice of several functions:
0-off
Off (both fan and heating element are switched off).
• 1000W
Hot air.
• 2000W
Very hot air.
*
No frost
"No frost" function:
The fan heater starts heating automatically when the temperature of the room
drops below +5 °C.
This appliance conforms to the basic requirements in the EU directive.
EngelskEngelskEnglish
English
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Wilfa FH-1W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info