774256
20
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
76
English
English
Kettle
Lid
Water scale
Base plate
Regulation of heat on the water, 40ºC, 70ºC, 80ºC, 90ºC and 100ºC.
On / off switch
Keep warm
First use of the machine
Please read these instructions carefully and keep them in a safe place. Boil fresh water in the
kettle at least twice before it is used for the first time. Use only plain water with no additives
or ingredients.
Use
Press the opening button to open the lid. Then fill the kettle with cold water and close
the lid by pressing down the cover until it locks.
Important note: On the kettle body there is a water level gauge. Please make sure not
to fill in more than the maximum level as marked on the gauge. If the kettle is over-
filled, boiling water can be spilled out. Put the kettle on the base. On the base station
there is the “ ” button for selecting different water temperatures.
Note: flashing light indicates current water temperature in kettle, steady light means
the target temperature.
Press the “ ” button which corresponds to your desired temperature. Press the “wilfa”
button to light up and the boiling process begins. As soon as the water reaches the
target temperature, the boiling stops and the “wilfa” button light off. The heating ele-
ment switches off automatically and the process has been completed. Now the unit can
be lifted up and the water can be used.
Keep warm
The “KEEP WARM” function allows you to maintain a specific temperature. Press
” and select a temperature between 40/70/80/90/100°C. Once you have selected
your desired temperature, press the “wilfa” button. Then the kettle heats up to the
previously set value and holds it for 25 minutes.
Decaling and cleaning
We recommend decalcifying the kettle in regular intervals, depending on the intensity
of use. Before cleaning, it is essential to remove the power plug from the socket and
wait until the device is completely cooled down.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Wilfa WSDK-2000S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Wilfa WSDK-2000S

Wilfa WSDK-2000S Bedienungsanleitung - Deutsch, Holländisch, Französisch, Polnisch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info