Cleaning Inner Parts and Fan
CARE & MAINTENANCE
2625
❷ Holding fan, turn fan cap clockwise.
❸ Rinse fan and fan cap with warm tap
water with detergent.
❹ Remove dust near airflow inlet of the
unit by using vacuum cleaner or soft
brush.
❺ After cleaning, replace fan and fan cap.
❶ Turn groove to open with a flat tip screw
driver, at the rear of the unit, and remove
top cover.
Holding
fan
HEPA + Carbon Combination Filter Replacement
❷ Slide the Combination Filter out.
❸ Remove vinyl packaging of Combination
Filter.
If
Combination Filter
is installed without removing
the vinyl packaging, the unit may not turn on.
If the unit is operated without removing the vinyl
packaging, it may cause abnormal noises or
product malfunction due to motor overheating.
❹ Slide the HEPA + Carbon Combination
Filter back into its original position.
Carbon Filter is replaced, and then HEPA Filter
is replaced.
❺ Place Pre-Filter and Rear Air Intake
Grille cover back into original position.
❶ Pull the tab on the back and remove the
Pre-Filter and Rear Air Intake Grille.
Rear Air Intake Grille and Pre-Filter are
combined.
Combination
Filter
